What's new

Matan

Enthusiast
Joined
Jul 21, 2015
Messages
93
Reaction score
48
Hi all,

I'm looking for Virtua Racing main filter board, or if can someone map the pins on the main board that are connected to the filter board to their ending on the filter board, I'll be able to wire directly to it.
Here is a picture of the port on the main board:

image_zpsiahxupvb.jpeg



Thanks all in advanced
 
TOP16151413121110987654321
5V5V5VGNDIO CN4 5IO CN4 6IO CN4 2IO CN4 15V5V
BOT16151413121110987654321
5V5VGNDGNDGNDGNDIO CN4 3GNDGNDGND5V5V
VirtuaRacingMainBoard.png

Looking into the connector on the back it's wired like this - the filter board is actually just a breakout board for the weird looking connector (that's still available on Digi-Key)

The main board only needs 5V and GND
Also run the TX and RX lines need to be connected to the corresponding lines on CN4 on the I/O Board or you get a blue screen
I/O board also needs 5V and GND on CN3

You also need to connect the separate video connector on the main board to a 24kHz compatible display

The schematics are actually pretty clear - it's a little hard to follow at first but once you get used to it it makes sense.

I hope this helps the next person in the future!

Mark
 
Last edited:
Sorry to ask ,is this what you're looking for?
 

Attachments

  • C360_2020-01-24-13-52-27-590.jpg
    C360_2020-01-24-13-52-27-590.jpg
    948.3 KB · Views: 230
  • C360_2020-01-24-13-52-37-508.jpg
    C360_2020-01-24-13-52-37-508.jpg
    709.6 KB · Views: 191
  • C360_2020-01-24-13-52-49-654.jpg
    C360_2020-01-24-13-52-49-654.jpg
    899.7 KB · Views: 215
The principle is the same but Virtua Racing is Model 1 - is that Model 2A-CRX?

The pinout is different but the idea is very similar

I just happened across this post looking for something else and realized that I'd already answered it - apologies that it's so old!

Mark
 
Back
Top