OK so I built a complete Net Boot set up for a friend with a Naomi 2 and it worked just fine .. So I finally got my hands on my own Net DIMM for my Naomi 1 Net Boot rig. Upgraded the ram to 512MB, installed the Zero Pic, and upgraded the bios to 4.01 then to 4.02 and everything checked out.
I got to start testing games and all the Naomi 1 games work prefect as expected but I keep getting "ERROR 22 COMMUNICATION ERROR OCCURRED BETWEEN MAIN BOARD AND OPTION BOARD" . The trouble shooting guide says clean the contacts and reseat the board. OK I do that and when I try to load a Atomiswave game it does it again. But then all of the Naomi 1 games work.
I am at a loss .. any ideas?
Thanks
-Drey
I got to start testing games and all the Naomi 1 games work prefect as expected but I keep getting "ERROR 22 COMMUNICATION ERROR OCCURRED BETWEEN MAIN BOARD AND OPTION BOARD" . The trouble shooting guide says clean the contacts and reseat the board. OK I do that and when I try to load a Atomiswave game it does it again. But then all of the Naomi 1 games work.
I am at a loss .. any ideas?
Thanks
-Drey
Last edited: