Kagaden Grand Master Joined May 7, 2017 Messages 521 Reaction score 891 Location Southern California Aug 6, 2017 #1 Hello, I was curious if anyone knew the part number for the lcd connector so I can purchase a longer one. As well as any quick walkthrough on recasing the multi. Thanks K
Hello, I was curious if anyone knew the part number for the lcd connector so I can purchase a longer one. As well as any quick walkthrough on recasing the multi. Thanks K
Kagaden Grand Master Joined May 7, 2017 Messages 521 Reaction score 891 Location Southern California Aug 7, 2017 #2 Nevermind... found here: LCD Extender: https://paradisearcadeshop.com/multi-pcbs/1653-darksoft-cps2-extension-cable.html Recasing: FrancoB wrote: For those wondering which pillar needs removing in the case, its this one: It needs enough material removing so it's almost flush with the case: I cut off about half of it with some sharp side cutters and then removed the rest with a Dremel.
Nevermind... found here: LCD Extender: https://paradisearcadeshop.com/multi-pcbs/1653-darksoft-cps2-extension-cable.html Recasing: FrancoB wrote: For those wondering which pillar needs removing in the case, its this one: It needs enough material removing so it's almost flush with the case: I cut off about half of it with some sharp side cutters and then removed the rest with a Dremel.
aoiddr Professional Joined Jul 21, 2015 Messages 372 Reaction score 134 Location Georgia, USA Aug 7, 2017 #3 Alternately, you could just shave off just half of the post instead of removing the whole thing.
Kagaden Grand Master Joined May 7, 2017 Messages 521 Reaction score 891 Location Southern California Aug 8, 2017 #4 Interesting, I'll be trying this soon