J
jassin000
Far as I'm aware, the 12B Neo Candy panels are always reproduction/home made (or officials that have been drilled out).
You should take a look here (KLOV account required)...
Last edited by a moderator:
- Thread starter Darksoft
- Start date
-
- Tags
- cps2 setup multigame
You should take a look here (KLOV account required)...
ShootTheCore
Legendary
Well, it's no Jasen's Customs caliber case, but I'm still pretty happy with how this turned out-especially considering that I'm not the steadiest Dremel operator out there. Looks good and runs like a champ!
Looks great! Did you end up having to solder the ribbon wires directly to the bottom, or were you able to work with the existing mounting brackets? I want to do this too but I'm concerned about my soldering and doing the correct pinout of the ribbon. If not, then I'll probably just do another plastic 3D printed case and keep it external.
ShootTheCore
Legendary
I replaced the stock connector with this right-angled connector:
http://www.digikey.com/product-detail/en/amphenol-fci/68021-116HLF/609-3337-ND/1878543
With the right-angle, I had just enough clearance.
Awesome, thanks, I'll give that a try
My CPS2 Multi turned up yesterday from Capozhwm - Who not only supplied the kit but found a donor board and case and installed for me as well - Top Bloke!!
The case was a beaten up Mexican Orange that had seen a lot better days so I decided to grab some vinyl spray and KnightRider the beast!
I know the sticker is upside down but the kit is going to stay in my Cute forever so I may as well enjoy the artwork. Now I just need to come up with a cunning discreet place for the LCD screen (...found it!!).
Cheers
StalkS
The case was a beaten up Mexican Orange that had seen a lot better days so I decided to grab some vinyl spray and KnightRider the beast!
I know the sticker is upside down but the kit is going to stay in my Cute forever so I may as well enjoy the artwork. Now I just need to come up with a cunning discreet place for the LCD screen (...found it!!).
Cheers
StalkS
Last edited:
Can't believe I missed this one! Excellent work! Though I can appreciate a full replacement case that will withstand WWIII, I do have a soft spot for nicely modded originals and yours certainly looks great! Truth be told, after getting my DS kit, I ran it once to make sure everything checked out and then got distracted by some other projects before finishing a proper case. Though incomplete, I did do some experimentation with painting techniques/schemes and think I have a winner. With a tailwind, maybe next year I'll have it done and post some pics
-ud
https://www.thingiverse.com/thing:857175
https://www.thingiverse.com/thing:2413990
I think most people run it out the circular "register" port. at least that's whats recommend in the official installation instructions.
EDIT: thanks gusmoney
if you do go with my enclosure I'm currently working on a holster that mounts to the front that fits my enclosure too
Last edited:
there's not a lag issue with the decoders? Thank you so much!!
The decoder itself is pretty fast (<1ms), so beyond that, the latency will be dependent on the controller you use (because a controller has its own processor to turn button presses into USB data). I've done my own testing, but for a 3rd party test, Pasky (long time arcade speed runner) recently posted some results:
https://twitter.com/TheRealPasky/status/901644672564682754
https://twitter.com/TheRealPasky/status/901644505241325570
Also, for future reference, Darksoft was kind enough to give me my own section, Temple of the Undamned, so feel free to ask questions there, too
-ud
