j_bogard's latest activity
-
j_bogard reacted to nem's post in the thread WEI-YA429H 9.6 ohms V/1.3 ohms H for a 29" CRT 7.6 ohms V/1.5 ohms H with
Like.
You can't use this chassis without an isolation transformer. You've likely blown a diode / diodes on the chassis. Check the ones near... -
j_bogard replied to the thread WEI-YA429H 9.6 ohms V/1.3 ohms H for a 29" CRT 7.6 ohms V/1.5 ohms H.I tried it last night and had an "emergency shutdown" :P because there was a bit of smoke after a few seconds. So after checking...
-
-
j_bogard reacted to nem's post in the thread WEI-YA429H 9.6 ohms V/1.3 ohms H for a 29" CRT 7.6 ohms V/1.5 ohms H with Like.
I'm not sure I see the difference in impedance vs inductance. If you're using a regular DMM, you're measuring resistance, not impedance...
-
j_bogard reacted to _rm_'s post in the thread WEI-YA429H 9.6 ohms V/1.3 ohms H for a 29" CRT 7.6 ohms V/1.5 ohms H with Like.
You mean "inductance" in millihenrys (mH) :D Anyway, i think the risk of blowing the chassis is actually related to the impedance...
-
j_bogard reacted to nem's post in the thread WEI-YA429H 9.6 ohms V/1.3 ohms H for a 29" CRT 7.6 ohms V/1.5 ohms H with Like.
I think you can try it without fear of blowing anything up. If you wanted to be completely sure, you would need to be able to measure...
-
j_bogard posted the thread WEI-YA429H 9.6 ohms V/1.3 ohms H for a 29" CRT 7.6 ohms V/1.5 ohms H in Monitor Help.Hello guys. I have an universal chasis WEI-YA429H that works with 9.6 ohms for vertical and 1.3 ohms for horizontal. I found a 29" CRT...
-
