Recent content by JamesRolfe

  1. J

    DARKSOFT CPS1 Multi - Support thread

    Thank you
  2. J

    DARKSOFT CPS1 Multi - Support thread

    Thank you, my next guess was the c board. But is strange, as I had the installer unmodify the c board, and initially it was working for months, so not sure what happened there. I have a few c board candidates but I’ll have to see if I can unmodify them myself. I read modified c boards play...
  3. J

    DARKSOFT CPS1 Multi - Support thread

    Ok I swapped supergun, and psu. Used a different A board. The same issue. Black screen, some games have music but I guess that is based on dip settings. And generally get the following screen when erasing games. Is it maybe the PAL chip that came with multi being faulty?
  4. J

    DARKSOFT CPS1 Multi - Support thread

    Do you mean check 5v is coming into the jamma edge on the A board? I’ve dialled in 5v using my PSU, the supergun display shows 5v. But I will try using my other psu and other supergun (HAS). Thanks for the tip.
  5. J

    DARKSOFT CPS1 Multi - Support thread

    Just a follow up did your A board stop booting the multi after using a spinner for the first time. My one first went wrong after using a spinner. Might just be coincidence, but just curious.
  6. J

    DARKSOFT CPS1 Multi - Support thread

    Very strange indeed. But I will just swap over boards with captain commando.
  7. J

    DARKSOFT CPS1 Multi - Support thread

    Thanks, I’ll swapped my captain commando A board over. Straight swap, nothing wasted
  8. J

    FS Capcom cps1 C board (with or without battery)

    Are these still for sale. Which is the best to plug straight into a darksoft CPS1.5 Multi?
  9. J

    DARKSOFT CPS1 Multi - Support thread

    Can’t seem to upload video but that’s a still from video
  10. J

    DARKSOFT CPS1 Multi - Support thread

    Hi All, I’m having issues with my multi. The multi was working for a good while with no problem. Recently I can get it to work. I just get a black screen, strange noise and graphic glitches (see video). The A board I have tested with my captain commando and it works no problem one I switch pal...
  11. J

    DARKSOFT CPS1 Multi - Support thread

    Thanks for the tip, I will work out the right pin etc.
  12. J

    DARKSOFT CPS1 Multi - Support thread

    Hi Darksoft, removed the spinner pcb and now works. Just switched between 5 games, no issues. Spinner was attached like this. Spinner worked both players but I couldn’t use spinner to shoot only to rotate characters. Button 1 on my set up was for shoot, couldn’t work it out. These spinners are...
  13. J

    DARKSOFT CPS1 Multi - Support thread

    Hi All, I have had my multi for a while and it has been working just fine. I now have a black screen and no sound when I switch on and switch between games. I have formatted 2 sd cards and reinstalled the multi-packs on them. Same issue. The only thing I have done recently which was different...
Back
Top