Recent content by Kundi

Interested in 3 kits

These are the settings you have to use when programming with a GQ. And yes, the byteswapped file is the one you need.

I have compiled lists for two other monitor chassis: Nanao MS-2934 Capacitor Diameter Qty Location 1uF 50V 5mm 1 C102 2.2uF 50V 5mm 3 C211, C212, C213 10uF 50V 5mm 4 C455, C456, C457, C956 10uF 250V 10mm 1 C322 22uF 50V 5mm 4 C107, C222, C458, C459 47uF 16V 5mm 5...

Interested in one, option 2 would be my preference

Hi guys! I would like to take this opportunity to say thank you for your great work. I finally got around to upgrading my spare KI1 board to KI2 today. Once again many thanks to all involved <3

Bought In the Hunt and a MVS 4-Slot from @Lady Bug. Very friendly communication, boards in condition as described, excellent packing job. Highly recommended :)

Wow, I think you've pointed me in the right direction :) I measured the component next to it: 250 nF As it looks, there are currently none available with the value... But I think I will try the 330s: https://www2.mouser.com/ProductDetail/605-101X41W334MV4E Thank you very much!!

Hi guys! I got a defective Sega 838-13683-93 IO board some time ago, to which the Jamma connector was probably plugged in the wrong way round. Some components are apparently burnt out: They are labelled EMF1 and EMF4. Does anyone know what these components are and where I can get a suitable...

I bought a Virtua Stick Pro from @AlxUnderBase. Extremely happy with the purchase, he's a very nice guy and the shipping was super fast. Thanks again!

When you get absolutely no sync with the OSSC, could you please try these settings? Sync OPT. -> H-PLL Post-Coast - 2 lines Sync OPT. -> Hsync Tolerance - 8.30us

Are you using a PAL SNES RGB cable? If so, remove the 75 Ohm resistors in the plug.

@friedpotatoz you need a 5V PSU

Bridging both legs with a screwdriver is more than enough, no need to desolder.

Thank you first of all :) From that pixelated glitch my guess is maybe a defective SRAM. My hope is that someone knows, which ones are responsible for the affected sprite layer.

I've completed the first level so far and the error is consistent so far. The roms I've checked (and also re-burned just to be 100% sure): 2F 8E 8G 10E 10G 16K 3L, 7L and 12K are still the original mask roms and un-socketed... They check okay though. Do you think, I should desolder and dump...