Recent content by Ma-Yuan

Yes i pushed and nothing is stuck. Based on the oled screen all behaves as intended. Last time i used p2 for a match was one week ago with my son and all worked perfectly fine.

Any further idea? Tested also my Tekken 1 PCB with direct connection to the jammafier. Same problem left P2 isnt working. Cleaned the connections even though all is clean. Could it be a software related issue? I mean i never touched the jammafier and i can not see any kind of damage on the...

@invzim Thats what i meant by the jammafier registers all inputs from JVS including left. I checked the oled screen plus other JVS hardware to make double sure all is fine. This left and right always on at the same time was only temporary and i can not reproduce this anymore. :-/ after a...

I know i can be really annoying 😅 forgive me 😔 I was just so frustrated since i had friends over to play on my cab on Saturday and first my new CPS2 strikes completely and after i got it back to work i found out p2 has issues on the jammafier. The jammafier registers the left from the jvs...

@invzim i have a problem with the jammafier. For P2 it does not send left for the stick to games anymore. I tested JVS boards so the stick is fine. Used tekken 3. Jvs p2 works fine. Using the jamma edge with jammafier p2 does not work properly anymore. Tested on an mvs and cps2 as well. Any idea...

Ok now the stick for P1 is completely dead and only p2 stick works partially 😭 Edit: Worked again on its own. Connection for the stick wasnt proper i guess since i changed p1 to p2 during my tests. Issue with p2 left still remains with the jammafier.

@invzim i have a problem with the jammafier. For P2 it does not send left for the stick to games anymore. I tested JVS boards so the stick is fine. Used tekken 3. Jvs p2 works fine. Using the jamma edge with jammafier p2 does not work properly anymore. Tested on an mvs and cps2 as well. Any idea...

1. All pins are ok on both boards. 2. I cleaned all pins and the connectors with wd40 for electronics wich is non conductive. 3. I connected both boards without shell.. didn't help either. After like 4hs i got Marvel Super Heroes to work. I nearly got Marvel Super Heroes vs Street Fighter to...

I have Marvel Super Heroes and Marvel Super Heroes vs Street Fighter for CPS2. I unplugged the jamma Harness today on my cps2 board to test another board. After i plugged it back in i got graphical glitches vertical lines on Marvel Super Heroes vs Street Fighter. Tried to plug the board back in...

Luckily its not washed out and looks really good with 240p only issue is the board sometimes does not boot after the good morning voice 🤣 which makes no sense since ot does not need to warm up to boot just trying it again solves it.

I have my Tekken 3 board connected via JVS and sometimes it does not boot it says good morning and then nothing happens most of the time it says twice good morning and then works. Its kind of weird any idea whats wrong?

Thx that worked 😊

I found a sync option that worked. Set it to separate. But i have not found the 240p vs 480i setting yet. It runs currently in 480i and that looks horrible.

I tested my cheap 20 euro china scaler. It has no issues what so ever. 🥺

I have an issue again i have Tekken 3 PCB and if i use the VGA connection with the scaler i get moving picture if i use the jamma connection and the jammafier i get dark and more or less stable picture but then i cant use the jvs usb connection. Any idea whats wrong?