Recent content by noonan2678

I'm way late replying here... I am the lucky recipient of @evertens fine work. It was fun being along for the ride with the creative process and the finished product far exceeded expectations. I'm sure most of you know already but for anyone reading this that's newer, I can't say enough about...

In as well - PM on the way.

I have the exact same issues that djsheep has, just put it down and haven't touched it in a while. I'm more intermediate with this stuff, so unsure what to purchase and how to correct. I'll fire it back up (been a bit) and will validate the issue to be the same. @miisalo- is it alright if I...

New menu fixed the file system error issue - thanks! The cart is still not retaining my settings though and resetting to default on each boot. I'd double check my battery, but it's recently new and I let the MVS run all night last night to ensure a charge. I'll come back to confirm that the...

Sorry for the late feedback. Confirming as well that my red screen issues are completely fixed with this revision. All builds reporting correctly and no functional issues after a couple of decent play sessions. I am getting a brief file system error upon bootup. There's an error that I can't...

Looking forward to testing this. To confirm, the link to the menu is an Oct date. Is that correct and should it report that way? If you'd confirm how the FW, Top and Menu should report, that would be awesome. Thanks!

Any stress on the edge connector using that?

Mine BARELY squeezed in with the bottom plexi, but it didn't quite fit with the black standoffs. I had contacted him about it (years ago) and he was willing to print slightly smaller ones that would clear. I lost track of it and haven't followed through with it yet.

@ekorz @Darksoft Confirmed that flashing back to the F/W that you posted, ekorz, is back to working properly.

Sorry, Guys. I was travelling for work and didn't get to this until now. @ekorz - No, I used the rom you provided and still get the red screen @Darksoft - No, not different firmware. We compared the exact builds/versions of everything. The last time I had the issue and ekorz and I got...

@ekorz Confirming the same info above. So, we're down to the KOF rom as the next possible variable. Would you please send me a link to that specific one you're using (email fine as well)? Thanks!

@ekorz - 1st, your settings image didn't make it to your post. I charged the battery up (tested with multimeter) and flashed back to an old version (roughly 3 updates ago) and all was fine. KOF '98 worked fine in both MVS and AES modes. I then flashed up to current exactly how you did. It...

I have a 1C with Uni 3.3 and also just updated. Went straight to '98 and got the red rom screen error. Switched to AES and worked fine. I can confirm that my battery was discharged at the time of update and testing. I'm going to let it run overnight, test the battery and then will re-test...

I have the same LCD issue and have not assembled yet. Has anyone done so? Curious of the tools that were used. My thought is a dremel...not sure what bit though. Happy to send the measurement of my screen as well. I have a laser measurement device that might work.

No, this is an issue with the FW. Darksoft has indicated that they are working it.