Recent content by Pinball

I connected the Sega cab CPS2 kick harness with a JNX CPS2-CPS1 converter, onto CNI02 on the Darksoft board. The SF2 kicks work fine now. Just thought I'd share a photo in case helpful :-)

Thanks dos, this is very helpful.

Thanks. I hadn't noticed the voltage! It's now 5.00V :-) I hadn't used the JNX there before- glad I did now! As a matter of interest, why does the CPS2 kick harness socket on the JNX not work? I've ordered an adapter to go directly on the Darksoft board.

I have a kick harness question :-) My 'New Astro City' cab has a CPS2 kick harness plug- see photo. I tried it with a JNX Atlas JAMMA connector that has the CPS2 (and other) kick harness socket, but buttons 4-6 didn't work on SF2. Is this normal, as I thought it should work automatically? Do I...

I received the programmed chips from buyicnow.com, and installed into the C2 board today. Everything works fine :) Had a great game of Thunderforce AC, but set the board to freeplay first, heh, as that game is a drainer (DipSw 1 all set to 'on' in case anyone wondering!).

I ordered 2 from sheep on ebay which were desuicided- 1 of these I re-suicided and is working currently on the multi. I emailed sheep asking for untouched C boards- no reply. I'd like to order 2 of your repro C boards please :-)

For programming the Sega C2 roms I found a solution which I thought I'd share: https://www.buyicnow.com/it.php?i=74 (Used & Tested) ST M27C322-100F1 $2.82 6x 1pcs EPROM programming service $0.20 6x This company has been recommended on this forum previously. Based in China, but...

Due to unleaded solder, I damaged a track on a Namco 256 board, and lifted one side of an adjacent resistor because of the higher temperature. Subsequently I repaired it with leaded solder, microscope etc. This is how I learned about garbage unleaded solder- never again!

Is anyone able to program the chips for the C2? I'd love to order a set.

Is anyone able to program the chips for the C2? I'd love to order a set.

I haven't had any luck with obtaining a non-desuicided C board (though am still looking). Meanwhile, I bought a digital microscope and decided to 're-suicide' a de-suicided C board from ebay that I had. It worked, and now so does the multi :-) My soldering skills are medium, but the microscope...

I've got the FPGA Qsound too on the multi, and it works like a charm.

Thanks for vouching for me. Yes, I'm bona fide, and the order was made ok :-)

I guess the PM system played up. I blame the Russians ;-) Any road up, I received your PM and ordered, so all good. Many thanks again- this is a GREAT product :-)

I'd like to order 2 C boards without the desuiciding mods (track cuts and wire), that are suitable for the multi. If anyone has these please could you PM me? Many thanks :-)