Recent content by rothgar

Is it anything like the white lines in this video? View: https://youtu.be/foEf_2i54zQ?si=CzIi8AMDk73smW09

PM'ed.

Thanks. I'm still trying to device whether I'll go with the ATX supply or modding the voltage regulator on the Capcom I/O. Because using an ATX supply will be hard to use on one of my cabs, I'm leaning towards modifying the Capcom I/O. I have enough skills that replacing the voltage regulator...

How's this solution working out for you? The sun psu's are hard to find.

Thanks for the information. Would you happen to know if a 27" WG U5000 would also fit?

I believe the Super Neo 29 came with a Hitachi monitor originally, but what other monitors can be used in this cab? Can I drop an MS9-29 or any other curved 29" crt into it?

I ran into this problem and I believe this was the fix from a quick google search: -modify code in piforcetools.py so any instances of lcd = Adafruit_CharLCDPlate() are changed to lcd = Adafruit_CharLCDPlate(busnum = 1) I am not home right now so I can't check my sd card but I think that's all...

Is the Super Neo 29 spoken for? Thanks.

From what I've read the GBSC will add 8ms of lag when downscaling to 240p, so half a frame. I'll try to take some pictures later, but I don't consider myself to be a good photographer. I am moving this setup to my big blue cab so I can setup fightcade as well for the time being.

Just a side note, today I went from PC (640X480, 31KHz)->GBS Control (to downscale to 240p, 15KHz)->Jammaizer->Arcade Monitor and the setup worked perfectly! So happy I won't need to to mess with Windows special video drivers and all of that anymore.

The Egret 2 uses the same connectors as the Egret 3, and you'll see the connectors listed here: https://wiki.arcadeotaku.com/w/Taito_Egret_II One is a 15-pin connector for player 1, one 12-pin for player 2, and don't forget the 2-pin S connector if you need P1button6 and P2button6. There's...

Nice scans! What scanner did you use for these?

The Wei Ya power supply in my Egret3 is able to run a Naomi 1 with netdimm plus Capcom I/O board using a 500W step down converter. I don't think it's a bad power supply.

This video should help you adjust the width :

Actually, I think I found an original panel. If it falls through, I will contact you.