Recent content by xuserv

DIP SW #1 for TEST MODE and others doesn't seems to be affect. TTT2 series only works with 720p display, i think only T6 series supports resolution change via dip switch.

JM20330 based converter and SM2258XT / PS3111-S11 based SSD worked several times for me, but not sure all of them will work. (on original setup not multi)

I've not seen dead CPU or GPU in system 369 yet, check the small fan on the top is spinning or yellow hdd activity led on back side of system 369. If small fan is not spinning its not getting powered from PS3 PSU or clogged from dust (big fan on the left is powered from separate 12v PSU). If...

The game itself already got 2 players support and doesn't require router for link, you can just extend 2 player inputs from jvs board to other side cab. (haven't tried pair play mode) If you still wanna know, its 192.168.93.x range.

-

-

-

That seems Live Monitor PCB not GAME PCB, even you have the dongles you can't play the game. You may need full hdd and dongle replacement.

That sounds reasonable, since i upgraded regular dimmboard which came with 1.02 firmware. btw, i also have same issue with net-dimm board (firm ver : 4.02/initial firm ver : 3.17) /w regular dimmboard daughter board. so i guess its firmware bug on specific dimmboard.

I think that jumpers for net-dimm daughter board not regular dimm daughter board. here is my regular dimm daughter board's picture if it would help. Increased voltage as you said but still no difference but now when i put my net-dimm daughter board back it giving me "ERROR 04 BOARD...

Which board jumper setting i should check? Voltage was solid 3.30 / 5.10 / 12.05 volts so i don't think voltage even matter. disconnecting the GD-ROM/CF gave me "ERROR 24 GD-ROM NOT FOUND" error message.

I have been followed this tutorial and successfully upgraded my regular dimm board firmware version 1.02 to 4.02 but i have weird problem. When i put net-dimm daughter board it boot fine (CF/Netboot) but when i put back regular dimm daughter board it doesn't boot at all just displaying black...

I had problem flashing this firmware to some of chihiro type 3s. in my case the chihiro blacked out during firmware flashing status on 68%. thanksfully i bricked only one media board (error 22) and troubleshooted this problem. when it blacked out do not turn off the system it will reboots...

I also has experienced same symptom. turns out my sys12 has been converted from other one and rom board caps are failed. after recapping rom board it came alive.