Search results

I recapped my PSU and checked that it did work after the recap. I replaced the fan and now I don’t get any power. I did take the PSU out of the cabinet as well because I am doing a restore. My question is, does the PSU need to be wired to the cabinet to turn on? Like a typical computer power...

Could I order one of these covers from you?

It was the DIP settings. Everything runs great! Thanks everyone for the help!

Disregard. I am seeing a little bit of static in the cabinet on another PCB. Ok last problem. I noticed that a number of games won’t load. Test screen loads and shows successful but never continues on to the game.

Thanks for that. Sorry for the confusion. Not sure what I did but it is working now. I did reflow the solder to those pins. I do notice the occasional static show up on the screen. Not sure what is causing that. If I plug another board into the cabinet I do not see this. Thanks for that...

Unmodified? So your original response meant that my C board should have worked? I know this board was working just fine on the board I took it from. I see what looks like a cut trace on some of the pins so there is some modification done here. I’m still not following what needs to be done here.

Thanks. Does someone have a picture of this? I’m not really sure what you are supposed to be doing here. I can solder but I don’t have a lot of knowledge about these boards. So I removed the solder connecting 45, 46 and 47. I need to connect pins 45 to 46 to ground? I see it looks like...

Set up my CPS1 multi today. My A board is an 89626A-4 with the 12Mhz crystal. My C board is a 92641C-1 that had a battery. These boards were on a working Strider that someone had burned the EPROMs for. I removed the battery from the C board. When I put the CPS1 together everything seems to...

Are units from HighScoreSaves shipping? I purchased very early from them.

Is someone working on a game selector for all 3 CPS boards/Darksoft mods? I plan on putting all 3 CPS/Darksoft mods in a Big Blur cabinet and am going to try to find a decent way to be able to give someone in standing in front of the cabinet a method to control which game is loaded on each...

If you have Dogyuun for sale please message me. I would like to buy. Thanks!

Any update on shipments going out?

Where can you find the option add-ones mentioned in the video for sale? Is shipping of the final version of the kit still 3/31 as noted on highscoresaves?

Thanks!

Ah I posted on the interest thread back in September of last year. I’m guessing the interest number is the post number. HSS Order 42099. Interest Number 2365

Sorry, why are people posting their HSS order number and what is a Interest number? I just bought the CPS1 Darksoft mod. HSS Order 42099.

Thanks, other than the key wiring harness did you have to do anything to your B board?

Will do. Thanks

Thanks. That is the guide I used. I checked all the pins and everything seems to be nice and snug. I guess my 93646B-4 B board is not ideal. I used the Championship guide for how to wire the wiring key connector. In the definitive guide I saw mention of possibly having to wire a jumper on...

Thanks, yeah I read that guide. It’s a little confusing because it was written in 2018 and appears to have instructions for previous versions of the Darksoft board. So I am not 100% what is being stated applies to my board. Besides having a working donor board, assuming a working Darksoft...