Search results

Oh yeah- located in GA, 30127 area.

Imugr link here : https://imgur.com/a/hbsoIxp Doing some spring cleaning- nanao ms8-26 tube and chassis- working, capped. No shipping on this, local pickup only. 250 obo. If you want to ship you have to arrange that through beltmann/sti.

Correct, the Korean ones run on that single board. The Japan banpresto marked one does not have that issue.

I’m assuming it’s that fix to make it run on all monitors. The ones on that psykio board sometimes won’t run on pvm/293X, ect.

Bump, want this gone- price lowered to 450. This is everything you need and drop ready into a jvs or jamma cabinet.

Will do, will be this evening when I get in from work.

Im about an hour west of Atlanta. If you’re interested I can get you some pictures tomorrow.

Also, where are you located? I am in GA and I have a cute I’ve done some work on.

@rewrite might be willing to take this deal. If he isn’t I might be.

Selling a mister setup that comes with the jamma expander, and jvs expander. Includes one ram upgrade and the WiFi adapter on the jvs board. Asking 550 + shipping, I think that is a fair price for this bundle. Mister isn’t my thing and it doesn’t get much use in my setup...

I went over mine and I found a lot, and I mean a lot of bad joints in the power section and on the flyback. Even if yours is still working fine, it might not be a bad idea to inspect it. It took some time but I went over the whole chassis and reworked everything with new solder.

I’ll be down for one set.

I’m not sure where to start looking since it’s so random; these chassis are a real bastard to troubleshoot. I’ll pull it this weekend and see if I can find anything out of the ordinary.

I have this issue on a 2930. It’s been fully serviced too. This issue only comes up on cps1 games. Anything else, no issue. The main offender is Daimakaimura. I’ve tried different pcbs and resolutions and the issue never replicates unless it’s cps1.

I got mine a few days ago, these are really nice.

This has been my experience too. It seems like different brands tubes are slightly different even with same or similar model numbers.

I’ve had decent luck opening up 27 Toshibas with component. The one I used for my blast swap had different curvature and the mounting holes were slightly off but it still ended up working with some finesse. OP, if you want to look at what I went through with my blast, Link here. This guy had...

A lot of those semi curved Toshibas aren’t the best quality either. I’ve had better success dropping the yoke and chassis on a consumer tube. It’s just finding one. Blast tubes are semi curved as opposed to the full curve of the MS9, and getting the ms9 tube in a blast and the fitting of it...

Correct, tube swaps on ms8/9 have been done, it’s finding the correct tubes that’s a crap shoot. I’ve had success on one but it seems the more curved the tube, the more pain it is to dial it in.

Hate to be the bearer of bad news, but most likely your tube is shot. I had the same behavior on the Bass Fishing cabinet I restored and it was broken underneath the yoke.