Search results

In for 1.

I'm looking to update the firmware on a DigiAV installed on a CPS2 board. The only instructions I can find for updating the firmware use Intel's Quartus Prime software, which is only available for Windows and Linux. I only have a Mac. openFGPALoader looks like it could be an option, but requires...

Buy from store.inertialcomputing.com. I had no issues. And when I thought I did have issues with the device, they were very responsive and helpful in trying to troubleshoot. Ultimately my issues ended up being the result of bad SD cards.

If anybody wants to buy the HAS 3.2 by itself, I'd be interested in buying the accessories that are listed with it.

Right. But I was curious if they're an "off-the-shelf" part that can be bought from a normal electronics supplier, or if these are custom made and the footprint is specific to the hybrid sound module.

I'm planning to do work on some boards that have the Konami hybrid sound module. As I remove modules, I figured I should socket them. I believe female pin headers have been offered as an option when buying Caius' sound module replacement, but was curious if these are generally available anywhere...

My Pilot Kids jumpers match the previous pic. My test button on my supergun does work.

Right you are on 3v. Thanks for correcting me. Fixed my last post. Happy to just drop the topic at this point. Just wanted to make sure the guy asking didn’t screw up his stuff.

One of the connectors between JVS IO and the Naomi is USB, but as shown in that link there are others, including a power connector. I'm not suggesting trying to power the Naomi from the Capcom IO; it won't work because JAMMA doesn't have 3.3v. I'm suggesting the opposite. If somebody's IO board...

Dumb question, but does the Capcom I/O connect to the Naomi differently than the Naomi I/O board? I only have the Naomi I/O board and am unfamiliar with the Capcom one. I ask because when I set mine up with the HAS connected via JAMMA edge on the Naomi I/O board and no power supply connected to...

No need to power the HAS; any power it might need it'll get from the JAMMA edge connector. In fact, it would probably be a bad idea to have power connected to the HAS while you also have the Naomi power supply going.

Just went through this the other night. The Naomi needs 3.3v which standard JAMMA doesn't have. So as plasia mentioned, you'll need to power it with a power supply that can output 3.3v. If you try to just power up from the JAMMA edge connector, the Naomi's fans will spin up but you won't get any...

There’s a startup delay value you can set in the scsi2sd-util. Maybe try setting that to 1 or 2 seconds to see if it helps.

I’m late to the party, but I have a Pilot Kids board if any other pics or info are needed.

I don't have an OSSC in my setup, but 5.1 works fine with my CPS3 / HAS / XM29 setup. Also, the Seagate replacement appears to be specifically geared toward replacing that model drive. I'm sure it would work, but no need to pay extra for that if you're using it for a CPS3. Looks like both of...

Consider sharing that with the SCSI2SD team. I'm sure they'd like to hear about your findings.

If you go back one page you'll see a post about 5.1 not working with a CPS3. Just trying to set the record straight so people don't think they need to pay $125 for an older version off eBay.

Got mine working. 3 main takeaways: SCSI2SD v5.1 works just fine with CPS3. Freezing on region select is caused by using the wrong image for your BIOS. Older, pre-SDHC SD cards may not be compatible. My problem ended up being two fold. Wrong ISO for my BIOS. I had gotten a repro cart and was...

I recently received a SCSI2SD v5.1. Spent over an hour last night trying different settings with my CPS3 with very little luck. The best I managed to get to last night is: Most images, when attempting to flash a new game, will drop back out to the boot screen and after a few seconds present the...

Got back from a trip last night and finally had time to install one. Worked great. Thanks for making these, and for making a dead-simple install video to follow. I foolishly just replaced all my batteries a few weeks ago, but have a friend with a board and he's been worried about the day he goes...