Search results

As above please, obviously fully working.

i may have just sorted it, removed the board and checked again the jumpers under them and both of the OPEN ones, were actually joined! I missed it completely. Will test again shortly......and report back

what do you mean no wire??? Its a rev 7 using a Pal G chip... will get a picture of 2nd set of jumpers

I have also just pulled a working PAL G chip from another cart, but that dont work either

here you go

As above, its a revision 7 board, all jumpers are definatley correct, I have also used a meter to confirm this. The only thing thats im unsure of it is the PAL chip, It was ordered as a "PAL-G" from your European Distributor, with the CPS2 multi kit but its reads GAL16V8D 15LP Is this...

yes its deffo the b board at fault, been tested on 2 different A boards and they both work with other games.

here you go, Yes its been cleaned, no bent pins. all socketed chips have been removed, checked and re-seated.

thanks, but I have far to many boards to fix before taking on anymore:) any other suggestions please?

I do agree, I've been trying to get a dead or phoenixed board for a while.......I'll get this one working first though mind you.:) ......if I can that is... what is that very top board for?? seems to work without it???

yes is a legit version, would prefer to sort it and use another game if Im honest with you.

no, makes no difference...

all roms removed and re-seated, b board plugged directly into A board without case....nothing appears to make any difference..

no bent pins and have re-seated 4 times already.:(

I have a super street fighter 2 game baord that I was planning on using for the Multi Cart, but Please see the pictures attached, game works fine, but has vertical lines through all sprites and other parts of the screen..... Where is the issue likely to be please?

As above please? needed asap. cheers sean

mmm, can find any info on this.... anyone, wish to swap 2 x 64mb sims for 1 x 128mb?

yes will do thanks, last question, I am missing a 64Mb simm, but have a few spare 128s, can I use one of those in its place?

ok, its a C revision cart, its this one AM29F