Search results

I Could be wrong but seems you have a problem with bank switching on slot 1, I would send it back for testing if I were you.

I have the same board with the exact same problem unfortunately I haven't fixed it either, if I flex it a bit where there are no chips it reacts but once you let go then goes back so I assume there is a cold joint or a broken trace somewhere but I haven't had a chance to sort it out. At first I...

Then some basic troubleshooting has to be made, access to a different system? Maybe a friend or another member here close to your area? even if regular carts work some bigger carts have different requirements.

:thumbup: glad you have it working!

No CN9 is for key injection, the little board that joins both boards is it sitting properly? can you post a pic of the whole setup? if you can take a pic between the B board and DS board too.

You say you have a 7 board and you got a Gpal made for you, why are you lifting a pin on the Gpal? lifting is only for Fpal.

Amazon still has some, people here use samsung EVO successfully, I personally use class 4 on both CPS2 multi and the neo multi with no issues on both, If you go with another brand just make sure is a reputable brand, the card is not a chinese clone and you format the card properly, what I shared...

I will assume given you don't know your board revision that you have never opened that console? It's an almost 30 years old machine, this is all assumptions but do you know someone with another neo AES that you can try? I believe you have a capacitor problem, if something doesn't work but then...

Can I be on the list for 1 as well for round 3?

I will also comment not to go into Neo Geo on a budget unless you want to go trough many loops and hoops to get what you will be happy with. Every path leads to a certain expense one way or the other, there are minimal setups that can get you started but later don't have all you want, it might...

I personally didn’t store it inside the box, I replaced another battery on a different board with it, but good call I never thought of that. Another good reason to switch to the undamned boards so you can forget about the second suicide by chemicals. There is more at risk leaving the battery...

I bought lots of stuff from sheep nova before mostly MVS and atomiswave, never disappointed BTW, so when I saw the post for the C boards I figured it was unusual for SN to sell those, now all makes sense. So DJsheep what happened to your webpage? I remember reading the story behind the name...

Yes Ack was right the only other thing I can think off is making an adaptor board on cad and overlap it to match the pins cause 35 and 1 are close together and 2 and 36 are apart, this is reversed from comercial types but for any system the card will be or too out or almost all the way in.

Check the footprint on ultra librarian it matches also Kujako better if you just bridge those 2 points seems the trace lifted Edit: Ack is right don't buy it.

68 Way Right Angle PCMCIA Connector With Solder Termination On digi-key

The sheep nova C board I got works so if anyone had any doubts go ahead pull the trigger.

Get ready to enjoy. To enjoy from the start and not joining the ranks of the issue army what you need is Micro SD card Class 4 (8, 16 or 32 GB has to be SDHC formatted to FAT32 and maximum allocation unit size usually 64 kilobites) once that is ready then load it with two folders: the first...

What Issues? I had a Neo marathon yesterday and had zero issues, My only problem is not having enough time to play. pull the trigger you won't regret it.

Very nice job! for the values use your phone's camera close to the negative band then review them on your pc I see 2 that might be obstructed though by the dissipator.