Search results

There is a thermal overload that opens and disables any power electronics. Maybe yours has failed? Worth checking that. The ffb board you have is the rs422 that doesnt need the rs232/rs422 comm converter. 838-14592-01 (chinese version ) or 838-14592-92 (japanese version) Will work but need...

Have a few options; 1. Disable hardware check for graphics card, but will need to use card similar to stocker. 2. Rename your new card device id to to the original ringedge, so game will pass hardware check. Again need to install similar gpu. 3. Put another ringedge gpu in like for like...

Heres a fix i found. Ringedge 1 would fire up, no video, shutdown, startup again, continue to run with no video. Changed all removable parts one by one for known good working parts and turned out the cpu was bad. One more rinegdge saved.

What happens when you turn on the ringedge. Do fans spin?

Have one ringedge that froze when in attract mode, looks like memory was damaged. Put new memory in and now get this nonsense, game boots but skips honeycomb splash screen quick and then goes straight to test mode? See boot video View: https://youtu.be/S6nFw6rJd-w

Easiest to get a re1 image and xcopy c: drive contents to your re2 drive, overwriting re2 c: drive. I never was able to get patch to work.

https://jjstuff.com/product/sega-naomi-marvel-vs-capcom-2-new-age-of-heroes-rev-a-cartridge-841-0007c-03-bbge-01a4413/

I would maybe try replacing the power supply first. Can even use a atx or consumer supply, just match the wattage at least. They are server grade so are reliable but nothing lasts forever. The mobo turns the power supply on just like any other consumer PC.

PM Agaynte, and order card reader. Card reader needs to be powered, +5vdc or +12vdc, can't remember but one them. Enable card reader in test menu. Connect serial cable to com2 Boot game, start a gane and when promoted to insert card press enter on card reader board. That's it. The device...

Com1 is ffb, com2 is card reader on ringedge. No difference than regular computer. You will need a usb to serial.adapter and set usb port as com2

Not same The gamoover is stand alone arduino based (winter's is rpi) Connects to ringedge using serial cable, basically replaces the card reader and has a lcd display so you can scroll to different cards/saves I dont think winter's does rfid which would be newer initial d (4/5/6/7/8 ). I...

My RE1 runs at 35 celcius. Shutdown is usually 50 celcuis or more. Wont be able to access bios easily.

Mine works fine, id 6/7/8 Gamoover site is where you can find https://www.gamoover.net/Forums/index.php?topic=40809.0

Do you have autocad, I think it can scale images pretty good.

Card reader emulator are already out there What do you anticipate to do different?

Check cpu temp in test mode after it runs for <2 hr Also there are error codes stored that can be accessed in test mode.

I will check, but that's a good catch, may of been pushed down on board when doing cap kit. Would that cap/diode soldered on bottom be a factory "tweak" ?

Pictures

Its more far gone now Get no DC voltage on secondary of T803 Measure at each diode. Will get some pictures

Yes and yes. I usually do two at a time, desolder, install and solder.