Made by 乾一盅#3417
If you need any help, feel free to PM me.

Need:
0.Arduino
1.I personally use "Sega JVS to JAMMA I/O Rev B"(Analog Input)

Preparation:
0.Arduino code included in program.
1.Press "Copy Arduino Code"
2.Paste to Arduino IDE
3.Make sure you changed the correct output pin!
4.Remember to change COM and check board type&3.3V/5V
5.Write
6.You're now ready to use TaikoS256keyboard!

Usage:
0.Open up the program.
1.There are 3 functions for you to choose
====RendaFunction
====Press Any Key other than Controls below

====AutoConnect
====Auto connects the first COM found on computer.

====FullScreen
====Fullscreen.
2.Default control keys are DFJK, change if you need and press Save.
3.If it's not connected, press Connect Arduino.
4.If you want to close, you can choose Close Connection or Close App.