[12ms] Platform: ZuluSCSI RP2040
[12ms] FW Version: 24.04.01-release Mar 31 2024 01:01:16
[13ms] DIP switch settings: debug log 0, termination 1
[13ms] SCSI termination is enabled
[14ms] Flash chip size: 2048 kB
[14ms] SCSI target/disk mode selected by DIP switch, acting as a SCSI disk
[22ms] SD card detected, FAT32 volume size: 14796 MB
[22ms] SD MID: 0x03, OID: 0x50 0x54
[22ms] SD Name: SL16G
[23ms] SD Date: 10/2015
[23ms] SD Serial: 0xDA8A7932
[67ms] Config file zuluscsi.ini not found, using defaults
[108ms] Active configuration:
[108ms] -- SelectionDelay = 255
[108ms] -- EnableUnitAttention = No
[109ms] -- EnableSCSI2 = Yes
[109ms] -- EnableSelLatch = No
[109ms] -- MapLunsToIDs = No
[110ms] -- EnableParity = Yes
[393ms] Finding images in directory /:
[419ms] -- Opening /CD1.iso for id:1 lun:0
[516ms] ---- Configuring as CD-ROM drive
[516ms] ---- Read prefetch enabled: 8192 bytes
[541ms] -- Opening /CD3.iso for id:3 lun:0
[637ms] ---- Configuring as CD-ROM drive
[637ms] ---- Read prefetch enabled: 8192 bytes
[650ms] -- Platform supports ROM drive up to 1692 kB
[651ms] ---- ROM drive image not detected
[651ms] SCSI ID: 1, BlockSize: 2048, Type: 2, Quirks: 0, Size: 574572kB
[652ms] SCSI ID: 3, BlockSize: 2048, Type: 2, Quirks: 0, Size: 574572kB