[10ms] Platform: ZuluSCSI RP2040
[10ms] FW Version: 23.06.03-release Jun  4 2023 00:20:41
[11ms] DIP switch settings: debug log 0, termination 1
[11ms] SCSI termination is enabled
[12ms] Flash chip size: 4096 kB
[14ms] SCSI target/disk mode selected by DIP switch, acting as a SCSI disk
[33ms] SD card detected, FAT64 volume size: 30427 MB
[33ms] SD MID: 0x03, OID: 0x53 0x44
[34ms] SD Name: SD32G
[34ms] SD Date: 11/2022
[34ms] SD Serial: 0x43A8DD66
[35ms] Config file zuluscsi.ini not found, using defaults
[36ms] Active configuration:
[36ms] -- SelectionDelay = 255
[36ms] -- EnableUnitAttention = No
[37ms] -- EnableSCSI2 = Yes
[37ms] -- EnableSelLatch = No
[38ms] -- MapLunsToIDs = No
[38ms] -- EnableParity = Yes
[62ms] Finding HDD images in directory /:
[63ms] -- Opening /CD1CAP-33S-1.iso for id:1 lun:0
[64ms] ---- Configuring as CD-ROM drive based on image name
[64ms] ---- Read prefetch enabled: 8192 bytes
[66ms] -- Platform supports ROM drive up to 3740 kB
[66ms] ---- ROM drive image not detected
[67ms] SCSI ID:1 BlockSize:2048 Type:2 Quirks:0 ImageSize:574572kB
[167ms] Initialization complete!