Dashboard
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
Recent Activities
-
buffi -
Replied to the thread JAMMA Video buffer circuit.
PostQuote from Velyks: “Quote from buffi: “You can have a look at the video buffering and audio isolation circuits I used for betsubetsu. arcade-projects.com/forums/ind…er-for-capture-streaming/ There's a link to the Kicad project in the main… -
Frank_fjs -
Replied to the thread JAMMA Video buffer circuit.
PostIt would remain a buffer. If you didn't attenuate the input you'd be outputting double the jamma voltage. -
MoppelTheWhale -
Replied to the thread Candy Cabs are Here. Gutting the Aero's to clean Hoagtech's PLOG..
Postalso lighter fluid works good for old adhesive -
Eric -
Replied to the thread Lindbergh SSD replacement.
PostWhere can i buy the multi Sega lindbergh? -
gunblade -
Replied to the thread Toshiba PF D29C051 convergence issue.
Posti think red cut off is is in extended menu options, red gain will be in standard menu and that may help imo that screen is virtually perfect so no point adding any magnetic strips -
AlxUnderBase -
Liked buffi’s post in the thread JAMMA Video buffer circuit.
Like (Post)You can have a look at the video buffering and audio isolation circuits I used for betsubetsu. arcade-projects.com/forums/ind…er-for-capture-streaming/ There's a link to the Kicad project in the main post. -
Darksoft -
Replied to the thread Darksoft's MultiMVS Latest Firmware, Menu and Instructions.
PostEnjkoy! -
Velyks -
Replied to the thread JAMMA Video buffer circuit.
PostBut if I do that it would no longer be a buffer?