Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Brezzasoft Crystal System conversions

389

Apocalypse

Namco Noir advice

117

Dk310

JVS Emulator

178

obcd

Yet another Naomi 1 Consolisation, A work in progress: Internal network connector

2

nam9

Pre-Order For Capcom Mini Cute Production

776

rewrite

Recent Activities

  • Apocalypse -

    Replied to the thread Brezzasoft Crystal System conversions.

    Post
    Quote from djsheep: “Hope this helps, values taken from the Crystal of Kings motherboard (AMG0110B) C64: unpopulated C75: unpopulated Q2: A1266Y Transitor Q3: C3198Y Transistor I need to take a measurement of C61, is this doable using my…
  • ekorz -

    Replied to the thread Brezzasoft Crystal System conversions.

    Post
    @Derick2k sadly I think @Apocalypse needs the value on an smd cap. It needs to be taken off a board before it’s measured
  • Derick2k -

    Replied to the thread Brezzasoft Crystal System conversions.

    Post
    Quote from Apocalypse: “AMG0110B :) Thanks for your help. ” I made a cap map list, confirmed to be the same values on AMG110B by @ekorz hope it helps.
  • Dk310 -

    Replied to the thread Namco Noir advice.

    Post
    I think it was mentioned in this thread, but do the models go by this release schedule: Red V1 = 2007 *I have this one Red V2 = 2009 Blue V1 = 2010 *I have this one Blue V2 = 2016 * i had no idea they made V2 that late. Gold = 2016* getting this..... is…
  • obcd -

    Replied to the thread JVS Emulator.

    Post
    1OK in serie with the base and 56K from base to GND should work just fine. The 56K prevents the transistor from conducting due to noise and rest voltage, even when the io pin is low. Be aware that the transistor will invert the sense. If the gpio is…
  • djsheep -

    Replied to the thread Brezzasoft Crystal System conversions.

    Post
    Hope this helps, values taken from the Crystal of Kings motherboard (AMG0110B) C64: unpopulated C75: unpopulated Q2: A1266Y Transitor Q3: C3198Y Transistor I need to take a measurement of C61, is this doable using my multimeter?