Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

IGS PGM Cart PCB Scans (And Projects)

76

djsheep

ATX bench PSU

18

Frank_fjs

Fast IO to Jammafier to JVSPAC2 in a Vewlix?

4

atrfate

Anyone using a CMVS-RGB pcb for MVS SCART/RGB?

37

Appley81

Hi from Salt Lake City

4

ShootTheCore

Recent Activities

  • djsheep -

    Replied to the thread IGS PGM Cart PCB Scans (And Projects).

    Post
    There’s English ROMS available for some PGM games on this site... Still just waiting for a PGM multi so I can make some room and offload the handful of carts I own and have one sit in the motherboard and call it a day...
  • PascalP -

    Liked atrfate’s post in the thread Fast IO to Jammafier to JVSPAC2 in a Vewlix?.

    Like (Post)
    Quote from PascalP: “Don’t think this will work at all, you are trying to use both the Jammafier and Fast IO in the opposite direction of how they should be used. So to get this straight, you have a Vewlix with Fast IO and want to connect to a PC? I…
  • Frank_fjs -

    Replied to the thread ATX bench PSU.

    Post
    Using the 4 pin molex isn't any better. They're designed to carry 2.5 amps, no more. You need to utilise the 20/24 pin ATX connector. It has appropriate gauged wire and a connector that can handle the current.
  • RJ45 to DB15 Controller Converter for MC Cthulhu/PS360+/Brook Retro Board A47auQSh.jpg Hello, I wanted to post this project here since it seem right up this forum's alley. I have been working on a cable for connecting my MC Cthulhu equipped arcade…
  • Frank_fjs -

    Replied to the thread ATX bench PSU.

    Post
    That's your problem. They're hard drive power ports, they don't put out full amperage.
  • atrfate -

    Replied to the thread Fast IO to Jammafier to JVSPAC2 in a Vewlix?.

    Post
    Quote from PascalP: “Don’t think this will work at all, you are trying to use both the Jammafier and Fast IO in the opposite direction of how they should be used. So to get this straight, you have a Vewlix with Fast IO and want to connect to a PC? I…
  • Appley81 -

    Liked low_budget’s post in the thread PARSEC Supergun Project.

    Like (Post)
    Just a quick update Assembly is going well, unfortunately I have some back ordered parts and that is holding up production. Hopefully 1 more week and I'll be able to finish assembly and test 6 more Parsecs. I have to admit, I'm not very fast…
  • vaughan14 -

    Liked GC8TECH’s post in the thread IGS PGM Cart PCB Scans (And Projects).

    Like (Post)
    UPDATE 18. ADDED: "Marshal Masters" PCBS ADDED: "Puzzle Star" PCBs ADDED: "Dragon World EX" PCBs ADDED: "Photo Y2K 2 R-RATED Version" PCBs Yes this IS a genuine PCB..... ADDED: "Dragon World: Pretty Chance" PCBs. IS there anyone HERE in Mame Dev??? So…