Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

IC: Repro 1P/2P Aero city panel 4/1/2020 update!

59

Kavas

Border Break

2

doozer

Toshiba d29c051 jamma problem (New Net City)

14

invzim

Pinned Finally, multi System 16B (Sega)

1,818

bagheera369

MS-2930-S Vertical Size

3

gunblade

Recent Activities

  • Kavas -

    Replied to the thread IC: Repro 1P/2P Aero city panel 4/1/2020 update!.

    Post
    They look great! Are those the only 2 options? Is it still possible to have them done without the start buttons?
  • Kavas -

    Liked alberto1225’s post in the thread IC: Repro 1P/2P Aero city panel 4/1/2020 update!.

    Like (Post)
    4.1 updated! I just bring the screen printing sample back. The blue color is slight lighter compared to original panel I'll ask print shop to adjust the color this week and I think we ready to go. and for some more pictures are here.
  • doozer -

    Replied to the thread Border Break.

    Post
    Thanks, but that manual is for the RE2, not the RE1. Also, it makes no mention of the specific dip switch settings for Border Break.
  • opt2not -

    Liked xodaraP’s post in the thread Finally, multi System 16B (Sega).

    Like (Post)
    ^ THIS It is unbelievably frustrating when you sit down to start building or fixing something, and you realise you didn't order enough of one part because the circuit calls for 3 not 1 and you ordered 2 (1 and a spare) Given the current situation…
  • opt2not -

    Liked bagheera369’s post in the thread Finally, multi System 16B (Sega).

    Like (Post)
    Quote from Mitsurugi-w: “Quote from nio: “You are always out of sockets and pins and mostly basic stuff. Lots of delay for nothing .... ” YOU try to keep track of the 1000s of parts I need for hundreds of products and keep it all together. Its…
  • KalessinDB -

    Liked bagheera369’s post in the thread Finally, multi System 16B (Sega).

    Like (Post)
    Quote from Mitsurugi-w: “Quote from nio: “You are always out of sockets and pins and mostly basic stuff. Lots of delay for nothing .... ” YOU try to keep track of the 1000s of parts I need for hundreds of products and keep it all together. Its…
  • invzim -

    Replied to the thread Toshiba d29c051 jamma problem (New Net City).

    Post
    Quote from Joe: “Quote from nem: “That's dynamic convergence that you want to fix. Basically involves putting strips of magnetically permeable metal underneath the yoke to realign the electron beams shooting out of the neck of the monitor. What do…
  • PascalP -

    Replied to the thread Toshiba d29c051 jamma problem (New Net City).

    Post
    Yes stuff like geometry, contrast and brightness definitely have 2 different settings for 15/31k. I mean if I calibrate my monitors B+ etc on the 31k input would this be ok-ish for the second 15k input as well or require a check?
  • PascalP -

    Liked nem’s post in the thread Toshiba d29c051 jamma problem (New Net City).

    Like (Post)
    15khz and 31khz definitely have a different set of saved settings on the PF. I wouldn't touch B+, but I would turn the screen pot on the flyback. Go in to the test menu, put your brightness and contrast setting in the middle position (either 50 or 100,…