Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Slightly too large MVS cartridges?

7

twistedsymphony

What Sega hardware is this?

4

rewrite

TMX Arcade Stick. The Second GEN. Fight Stick

6

hursit

Jamma help

5

Kidkaos

New Generation Metal Shell For Dreamcast

79

hursit

Recent Activities

  • twistedsymphony -

    Liked rewrite’s post in the thread Jamma help.

    Like (Post)
    Cocktail just means it'll flip sides between 1P and 2P rounds. Unless I'm mistaken, this still requires a vertical monitor.
  • twistedsymphony -

    Replied to the thread Slightly too large MVS cartridges?.

    Post
    I understand what you're saying now; the width is slightly larger like someone stretched out the cart. I'd guess that it's just a poorly made replica shell, can't say I've ever seen one like that.
  • Bluetear -

    Liked hursit’s post in the thread TMX Arcade Stick. The Second GEN. Fight Stick.

    Like (Post)
    Hello guys TMX Arcade Stick, How to Build Video is ready. I hope you will love it youtube.com/watch?v=faExNbeMvjc
  • rewrite -

    Replied to the thread What Sega hardware is this?.

    Post
    Quote from CoolFox: “You can swap, it's kinda like a naomi. ” Cool! This one doesn't seem to have any removable bits I can find aside from the security chip. I do see two Naomi cart connector looking bits, and a CF card spot. I'll put it on the…
  • hursit -

    Replied to the thread TMX Arcade Stick. The Second GEN. Fight Stick.

    Post
    Hello guys TMX Arcade Stick, How to Build Video is ready. I hope you will love it youtube.com/watch?v=faExNbeMvjc
  • CoolFox -

    Replied to the thread What Sega hardware is this?.

    Post
    You can swap, it's kinda like a naomi.
  • furntree -

    Liked everten’s post in the thread ST-V Stereo Audio + Kick PCB (EVERTEN).

    Like (Post)
    Got some boards ready. Way too much soldering for one night (1120 connections). I still need to crimp the harnesses, but a bunch should be going out tomorrow. 50066809008_b1a55b47f1.jpg
  • Kujako -

    Replied to the thread Slightly too large MVS cartridges?.

    Post
    Quote from twistedsymphony: “Quote from Kujako: “(I picked it up because the eproms where socketed rather than soldered on so I could easily reprogram it ” There's your problem. the reason EPROMs aren't socketed normally is because they don't fit…
  • notsonic -

    Liked slayer213’s post in the thread Mortal Kombat II noisy video.

    Like (Post)
    I had interference on both mk1 and mk2 t unit boards (like power waves). Recapping all of those blue 10uf 25v axial caps fixed both boards and picture is perfect now. I used these mouser.com/ProductDetail/667-EEU-FR1H100 and bent the positive leads over…
  • Kidkaos -

    Replied to the thread Jamma help.

    Post
    60 in 1 is Vertical only, you'll have to rotate your monitor to Tate mode (vertical) The Pandoras Box 9s is pretty good, it now plays NBA Jam with little to no lag unlike previous versions that were un-playable like Mortal Kombat.