This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

STR-S3115 datasheet (+WTB)



Nanao MS-2932 Horizontal issue



Fan and arcade PSU


Calibrating a PVM with a console



Blast City Cleanup/Restore - Stringbean



Recent Activities

  • caius -

    Replied to the thread STR-S3115 datasheet (+WTB).

    I managed to find only the internal block of the STR-S3115, I don't know if it can be useful to you though. AliExpress carries it but I don't know if we can trust, there are a lot of counterfeit/fake/remarked ICs around
  • BlinG -

    Replied to the thread Nanao MS-2932 Horizontal issue.

    Is that Naomi set to 15khz? My understanding is the 2932 only does 31khz
  • arcadeprojectsrocks -

    Posted the thread Fan and arcade PSU.

    I need to power a 5 inch fan by my arcade PSU. I have a fan now that's labeled 12v 0.27a with 2 pins. Can I just connect one pin to +12v and the other to ground? I'm guessing it will spin way too fast if I do that. I'm happy to get another fan if…
  • Deviiid -

    Posted the thread Nanao MS-2932 Horizontal issue.

    Hello everyone, i've purchased a used sega naomi universal cabinet and it arrived with an issue i was hoping i could get some help with from some expert people! My issue is with the horizontal picture, instead of being able to adjust it like other…
  • Apocalypse -

    Posted the thread STR-S3115 datasheet (+WTB).

    Hey, I'm looking for the datasheet for STR-S3115 used in many Sony PVMs. Also if someone could sell me a couple of those that would be much helpful! (Found a few places online where they sell for $20/pc + $15 shipping + $30 tax on arrival, a bit steep…
  • Apocalypse -

    Liked ShootTheCore’s post in the thread Calibrating a PVM with a console.

    Like (Post)
    I recommend using the SNES 240p Test Suite if you can. Other consoles display fewer color gradients and also may not support a true black (0% IRE) for accurate G2 calibration.
  • Apocalypse -

    Replied to the thread Calibrating a PVM with a console.

    Quote from TheDeath: “You can find the same on ps1, MegaCD, PCEDUO or Dreamcast (same 240p test suit). Much easy to burn a simple cd junkerhq.net/xrgb/index.php?title=240p_test_suite ” Actually it's easier for me to burn a ROM. Haven't burnt a CD in…
  • nem -

    Liked Hammy’s post in the thread ZN1 Bios board arrives!.

    Like (Post)
    Quote from twistedsymphony: “both PR and PR2 are "trash fighters" just like SFTM, Blood Warriors and Fists of Fire. they're fun because they're hilarious B-movie Bad with that said. @Hammy I will gladly send you a free G-Net board if it means PR2 might…