Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Pinned A Freeware Taito TypeX2 Multigame.

2,354

Horris

6 Slot burnt out power on jamma edge

1

Apocalypse

Darksoft Taito F3 Support needed

8

Chocozoka

Button layout help

25

ModGirl

Discharging the tube

10

erzane

Recent Activities

  • CPZ - SAVEYOURGAMES -

    Liked ark125’s post in the thread --> Get your CPS2 Multi game here!!!! <--.

    Like (Post)
    Received, installed and tested. It works perfectly and soldering the wires for the original keys was easier than I thought, there is plenty of space to solder the cables. Thank you so much. It´s a dream come true.
  • Horris -

    Replied to the thread A Freeware Taito TypeX2 Multigame..

    Post
    Hello Everyone, I'm new to the forum but feel like I've been here ages as its taken me a couple of weeks to read through the 118 pages, Its amazing that the same members are still here and active after 4 years, I've just a few questions if you don't…
  • hoagtech -

    Liked hursit’s post in the thread New Generation Metal Shell For Dreamcast.

    Like (Post)
    Hello People A Huge Update for DreamCase The manufacturing process continues rapidly. I can say that im nearly finish it. I hope will starting to shipping first pre-orders at the first week of May. I have already make some prototypes which Back and…
  • Apocalypse -

    Replied to the thread 6 Slot burnt out power on jamma edge.

    Post
    Quote from segasonic91: “The board was used with a psu that was way too high and it fried the jamma pins that supply power and ground. ” Sorry to say but if voltage was "way too high" then you can abandon the repair, most chips are probably fried now…
  • brizzo -

    Liked dewmansnk’s post in the thread AWSD Power Supply Interface PCB.

    Like (Post)
    All finished Here it is all populated and installed on the PS mKO1G7m.jpg The clearance on the back side looks adequate. Plus as an added bonus, the nylon nuts used to hold on the voltage LCD prevent the PCB and lead protrusions from hitting the metal…
  • brizzo -

    Liked dewmansnk’s post in the thread AWSD Power Supply Interface PCB.

    Like (Post)
    PCBs arrived ZHx1m8j.jpg Mounted on the front of the Meanwell PS Paxo9RO.jpg Board with the AC input power connector set in place, my other connectors are in route. uTuy2rB.jpg I will take more pics when I get it fully populated. Still have to…
  • brizzo -

    Liked dewmansnk’s post in the thread AWSD Power Supply Interface PCB.

    Like (Post)
    After having the power supply on my AWSD die, and looking into replacement options, it seemed that a nice 4 output Meanwell might be just the ticket. They make a model that is a bit expensive but has all the output one could wish for in an arcade power…
  • brizzo -

    Liked dewmansnk’s post in the thread AWSD Power Supply Interface PCB.

    Like (Post)
    Got my batch of PCBs from JLC a little while ago, they came out really nice, black solder mask and ENIG gold plating. Still waiting on more voltage LCDs, using my batch of 5 that I overpaid for on Amazon, so can make a few of these. Ill go back through…