Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Pinned How To Use GD-EMU Rhea and Phoebe (Card Selection, Formatting, and formatting Images)

162

plasia

Minigun Supergun - An Open Source Supergun

1,050

daffy

OutRun gear display hack

7

nonosto

MS9-29 Solid-State "High Life" capacitor replacement

8

stj

Discharging the tube

12

nem

Recent Activities

  • There's some missing stuff in the naomi list, off the top of my head referencing what's on my sd card (I run capcom IO): - Border Down - Guilty Gear XX (few versions) - Beach Spikers - Melty Blood (few versions) - Psyvariar - Radirgy - Street Fighter…
  • daffy -

    Replied to the thread Minigun Supergun - An Open Source Supergun.

    Post
    What's the best console like equivalent of this Supergun? Supergun in a box with internal PSU that is, the Minigun has all the features that I would want otherwise. However, if anyone's got a good idea on how to package the Minigun I'm all ears :)
  • nonosto -

    Replied to the thread OutRun gear display hack.

    Post
    Quote from Apocalypse: “@nonosto 2 buttons? How does that work? The gearstick is wired to a single input. What is the behaviour you experience with 2 buttons? ” THX you have one bitton fot H and one for L, in my set on saturn X = L A=H. It's same…
  • nonosto -

    Liked Apocalypse’s post in the thread OutRun gear display hack.

    Like (Post)
    @nonosto 2 buttons? How does that work? The gearstick is wired to a single input. What is the behaviour you experience with 2 buttons?
  • kingcar -

    Liked Hatsune Mike’s post in the thread NAC Splitfire: JAMMA streaming solution.

    Like (Post)
    Noted. I'll comb through and update the list at some point. Good news is the PCB house has reached 100% so now it's a matter of waiting. The only hand assembly I'm doing is the JAMMA connector itself. There will be a pleasant little surprise related to…
  • stj -

    Replied to the thread MS9-29 Solid-State "High Life" capacitor replacement.

    Post
    so just to be clear, polymers DO age. i have tested and binned lots of old polymers from server motherboards.
  • suverman -

    Liked nem’s post in the thread Discharging the tube.

    Like (Post)
    Quote from erzane: “if the monitor is disconnected and the sucker already taken off, there isn't charge inside the tube anymore. ” This is wrong. The CRT has two conductive coatings on the inside and outside of the tube, and together they form,…
  • suverman -

    Liked nem’s post in the thread Discharging the tube.

    Like (Post)
    Or you can just discharge it like you've discharged the tube before. Use a smaller flathead screwdriver (connected to the frame as always) and touch the side of the anode hole (slide it in at an angle). Basically you're removing the potential inside by…
  • nem -

    Liked Hatsune Mike’s post in the thread NAC Splitfire: JAMMA streaming solution.

    Like (Post)
    Noted. I'll comb through and update the list at some point. Good news is the PCB house has reached 100% so now it's a matter of waiting. The only hand assembly I'm doing is the JAMMA connector itself. There will be a pleasant little surprise related to…
  • nem -

    Replied to the thread Discharging the tube.

    Post
    Or you can just discharge it like you've discharged the tube before. Use a smaller flathead screwdriver (connected to the frame as always) and touch the side of the anode hole (slide it in at an angle). Basically you're removing the potential inside by…