Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Anyone using a CMVS-RGB pcb for MVS SCART/RGB?

67

SVM

Pinned STV Cartridge instructions and trouble shooting

141

Darksoft

The Definitive Guide to the System 16 Multi Kit

90

nonosto

Atomiswave wei ya intermittent issue

5

Zitz

SEGA System 16 Multi LCD games selector

336

brentradio

Recent Activities

  • opt2not -

    Liked brentradio’s post in the thread SEGA System 16 Multi LCD games selector.

    Like (Post)
    Quote from opt2not: “I’ll just move on and not butt-in anymore on this topic. Again, my apologies to you. ” Yeah, why don't you go butt-in on the M92 Multi thread where you belong... (lucky dog!) :D
  • SVM -

    Replied to the thread Anyone using a CMVS-RGB pcb for MVS SCART/RGB?.

    Post
    Sorry, but if the components are ok than there is not much I can do for you... :-/ Are the resistor values correct? R1: 9.53KΩ R2, R3 & R4: 7.5KΩ R5, R6 & R7: 1.2KΩ R8: 620Ω R9, R10 & R11: 5.1MΩ R12: 10KΩ R13, R14, R15 & R16: 75Ω Are GND and 5v…
  • Darksoft -

    Replied to the thread STV Cartridge instructions and trouble shooting.

    Post
    You could, but would require some modifications on the PCB of the multi. We will think of something when we have a bit more of time.
  • brentradio -

    Replied to the thread STV Cartridge instructions and trouble shooting.

    Post
    If I own the ST-V multi and a Batman Forever sound board, would I be able to play Batman Forever with the sound on the multi?
  • xodaraP -

    Replied to the thread Anyone using a CMVS-RGB pcb for MVS SCART/RGB?.

    Post
    Ok, it doesn't matter in this case because I'm not getting sync from the RGB PCB. I have beeped out quite a lot of the circuit and it's working. 2 boards have the exact same issue so it isn't a build issue. All parts were ordered from Mouser including…
  • xodaraP -

    Liked SVM’s post in the thread Anyone using a CMVS-RGB pcb for MVS SCART/RGB?.

    Like (Post)
    Quote from xodaraP: “You say the way it is meant to be is using a straight through cable for the AES, but then you say others have had issues with sync on straight through cables. Can you explain what cable you are using that works? ” No, I said ONE…
  • nonosto -

    Replied to the thread The Definitive Guide to the System 16 Multi Kit.

    Post
    must be 10 mhz? 12mhz is it good?