Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Discharging the tube

12

nem

OutRun gear display hack

6

Hellfromabove

6 Slot burnt out power on jamma edge

12

segasonic91

Pinned Australian Roll Call / Registry / Deals Thread

530

Frank_fjs

Taito F3 bad Color RAM

1

Thchardcore

Recent Activities

  • nem -

    Liked Hatsune Mike’s post in the thread NAC Splitfire: JAMMA streaming solution.

    Like (Post)
    Noted. I'll comb through and update the list at some point. Good news is the PCB house has reached 100% so now it's a matter of waiting. The only hand assembly I'm doing is the JAMMA connector itself. There will be a pleasant little surprise related to…
  • nem -

    Replied to the thread Discharging the tube.

    Post
    Or you can just discharge it like you've discharged the tube before. Use a smaller flathead screwdriver (connected to the frame as always) and touch the side of the anode hole (slide it in at an angle). Basically you're removing the potential inside by…
  • Hellfromabove -

    Replied to the thread OutRun gear display hack.

    Post
    Very cool. Thanks for creating this.
  • segasonic91 -

    Replied to the thread 6 Slot burnt out power on jamma edge.

    Post
    Quote from Derick2k: “I have fully working 6slot, recapped, battery modded, modbios installed, etc.. but its in storage, I gotta pull that hing out and put it up for sale. ” I doubt it will take long to sell ;) Working boards are like gold noe, aren't…
  • segasonic91 -

    Liked PascalP’s post in the thread 6 Slot burnt out power on jamma edge.

    Like (Post)
    Loved my 6 slot MVS cab and regret selling it (but did it in favor of getting a NNC, so still good I guess ;) ), but luckily my 6 slot was working perfectly, just recapped the audio section when I got it and the battery and that's it. My current 1 slot has…
  • Apocalypse -

    Replied to the thread OutRun gear display hack.

    Post
    @nonosto 2 buttons? How does that work? The gearstick is wired to a single input. What is the behaviour you experience with 2 buttons?
  • KmanSweden -

    Liked Hatsune Mike’s post in the thread NAC Splitfire: JAMMA streaming solution.

    Like (Post)
    Noted. I'll comb through and update the list at some point. Good news is the PCB house has reached 100% so now it's a matter of waiting. The only hand assembly I'm doing is the JAMMA connector itself. There will be a pleasant little surprise related to…
  • So I was was looking through the MAME Driver for Taito F2 earlier and I noticed that there's a slightly different machine configuration for the World Release of Dead Connection and the Japanese release of Dead Connection. Previously I had modified my…
  • nonosto -

    Replied to the thread OutRun gear display hack.

    Post
    THX buddy test with canonball windows. Run perfecty with one button gear, but dont run with two botton gear set . I dont know if it's fixable.
  • Derick2k -

    Replied to the thread 6 Slot burnt out power on jamma edge.

    Post
    I have fully working 6slot, recapped, battery modded, modbios installed, etc.. but its in storage, I gotta pull that hing out and put it up for sale.