This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Pinned Finally, multi System 16B (Sega)



Pinned Taito F3 Make Your Motherboard Region Free



Pinned A Freeware Taito TypeX2 Multigame.



Virtual Ribbon - The Permanent Virtual Boy Eye Fix by SSFD



Pinned STV Cartridge instructions and trouble shooting



Recent Activities

  • KalessinDB -

    Liked everten’s post in the thread Taito F3 Stereo Audio PCB.

    Like (Post)
    @Frank_fjs was kind enough to share some ideas. Very much appreciated! Need to figure out how to squeeze it all in.
  • KalessinDB -

    Replied to the thread Finally, multi System 16B (Sega).

    This is where you go for orders yes, and if you mean the Z80/68k chips it doesn't come with them BUT your board might already have them - both of mine did. Plenty of System 16 boards have been resurrected over the past few decades after all.
  • mugen_ketsueki -

    Replied to the thread Finally, multi System 16B (Sega).

    Is this the place to make a order for the multi? And does it come with the chip needed to swap for the board?
  • Pinball -

    Replied to the thread Taito F3 Make Your Motherboard Region Free.

    I recently bought the Darksoft multi and a Taito F3 board, so have encountered this problem. The pin triplets affected by these plastics don't seem to be used (as some folks have removed them without issues), so can I ask a dumb question- why don't the…
  • thegreathopper -

    Replied to the thread A Freeware Taito TypeX2 Multigame..

    Where and how do I create a config file? I presume I open the game folder, in this case Crimson clover in explorer and will I find a config folder or...... what I am aiming for is 2 versions of Crimson Clover one Hori, one Vert. So two options on the…