Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

REPAIRED FF BOARDS SHOWING 7F ERROR NO FEEDBACK AT ALL

3

dingsbums

Namco 256 won't boot Soul Calibur II?

18

nem

Bought my first Model 2 board and I have no idea what I'm doing! Please help!

6

segasonic91

MS-2930-S Vertical Position

5

jeffpin

Pinned Finally, multi System 16B (Sega)

1,825

segasonic91

Recent Activities

  • dingsbums -

    Replied to the thread REPAIRED FF BOARDS SHOWING 7F ERROR NO FEEDBACK AT ALL.

    Post
    I have the exact same error on my Scud Race Cab but its not 7F, its 0F ;) . So you fixed it by disassambling the steering cockpit from the backside and a gear had a missing cog and because of that the belt was off ? How did you fix that ? Replaced the…
  • digitron -

    Liked dannahan’s post in the thread CPS2 I/O Interface.

    Like (Post)
    This is beautiful. Thank you @RGB! dVjwrJH.jpg
  • nem -

    Replied to the thread Namco 256 won't boot Soul Calibur II?.

    Post
    You could replace the pin headers with a switch though. Who knows, maybe someone did that with plasia's motherboard.
  • nem -

    Liked twistedsymphony’s post in the thread SNK P.O.W. daughter board missing + rom size.

    Like (Post)
    Not sure if you've made any progress on this but earlier tonight I had a Konami Super Contra with graphics issues and discovered that, like POW, the ROM expansion board could be completely eliminated. Since my problem was likely on the expansion board I…
  • I have a Virtua Cop 2 that is an equal nightmare. Exactly where does the video plug in on these things? The bottom of that last page of the HotD manual was cut off. Too bad some fucktard cut the cables on my guns, so I could only look at the pretty…
  • stt1 -

    Liked Mitsurugi-w’s post in the thread Finally, multi System 16B (Sega).

    Like (Post)
    Quote from nio: “You are always out of sockets and pins and mostly basic stuff. Lots of delay for nothing .... ” YOU try to keep track of the 1000s of parts I need for hundreds of products and keep it all together. Its trickier when multiple designs…
  • twistedsymphony -

    Replied to the thread Namco 256 won't boot Soul Calibur II?.

    Post
    Quote from plasia: “Switching the mode involves a switch on the actual board. It's on the right side on the pcb iirc and it's labelled. ” Quote from plasia: “umm unless it's been taken off it should be there. From memory it'll look something like…
  • jeffpin -

    Replied to the thread MS-2930-S Vertical Position.

    Post
    Anyone have a schematic for this chassis? Q402 is hanging on by a thread, definitely broken connection. Might not be able to salvage it. Legs are pretty much gone. Possible replacement part number? 49738961506_38d2c1fc99_z.jpg