Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Looking for australain guy for help

16

gunblade

Any PGM Conversion info out there?

1,248

XeD

ST-V Custom Metal Case

9

ebzero89

Super Neo 29 Candy Control Panel Reproduction.

8

hursit

JNX Phase - New Fighting Adapter for Your Dedicated Neo Geo cab

9

XianXi

Recent Activities

  • gunblade -

    Replied to the thread Looking for australain guy for help.

    Post
    i doubt flyback is bad, most likely the hv adj pot needs to go back to the correct position there is a possibility the HOT is short circuit the right way to do this is turn the hv adj down and then use a hv probe connected to meter and adjust the hv to…
  • nonosto -

    Replied to the thread Looking for australain guy for help.

    Post
    Quote from xtrasmiley: “I think @rewrite is doing this work now, and check out this guy: retrohacks.net He was recommended via this video I watched the other day: youtube.com/watch?v=mBUeDDuRfmU Welcome to the forums and good luck man! ” thx. in…
  • nonosto -

    Replied to the thread Looking for australain guy for help.

    Post
    when you said shutdown you mean flyback turn off or died? Is it a symptom?
  • nonosto -

    Liked gunblade’s post in the thread Looking for australain guy for help.

    Like (Post)
    no wonder you don't get a picture after adjusting HV.adj, that is for high voltage- its probably going in hv shutdown at least
  • opt2not -

    Liked yuro’s post in the thread UD-USB Decoders.

    Like (Post)
    Quote from opt2not: “one last question, are there recommend screws I can use to secure my decoders to my HAS? I feel they’re too easy to detach from the DB-15 ports. ” I jacked mine from another connecter and use them the same way you're intending.…