Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Primal Rage Supergun Project

10

ekorz

Pinned The Definitive Guide to Fixing Your CPS2 Multi Kit

244

gobblebit

Initial d6 linking

20

Aaronr33

Batman Forever sound board harness

12

euphoria

Pinned How To Use GD-EMU Rhea and Phoebe (Card Selection, Formatting, and formatting Images)

125

plasia

Recent Activities

  • ekorz -

    Liked Foreezy’s post in the thread Primal Rage Supergun Project.

    Like (Post)
    Sorry for the spam, but I got the audio to work! youtu.be/Ivtxm9A7pGE I removed the JNX adapter and voila, clean mono audio. I'll figure out why the adapter was stopping the audio and update when I find out. Major shout out to @ekorz and @SmokeMonster
  • ekorz -

    Replied to the thread Primal Rage Supergun Project.

    Post
    @SmokeMonster the wiring schematic makes it look like the pcb has amplified stereo, not line level. Is that what you’ve found? I never owned the filter board or cab and can’t make sense of the actual “jamma” pinout for the audio (manual). But here’s…
  • Foreezy -

    Replied to the thread Primal Rage Supergun Project.

    Post
    Sorry for the spam, but I got the audio to work! youtu.be/Ivtxm9A7pGE I removed the JNX adapter and voila, clean mono audio. I'll figure out why the adapter was stopping the audio and update when I find out. Major shout out to @ekorz and @SmokeMonster
  • Foreezy -

    Liked SmokeMonster’s post in the thread Primal Rage Supergun Project.

    Like (Post)
    Quote from ekorz: “ smokemonster modified his pcb to accept a particular connector, but you could just take it from the header that’s already there. Wire it to RCA jacks for line level stereo. If you need help I can probably make you one. ” Oh,…
  • gobblebit -

    Replied to the thread The Definitive Guide to Fixing Your CPS2 Multi Kit.

    Post
    Quote from Kavas: “The only part that was troublesome for me was connecting the smallest connector piece between the two PCB's. For me the smaller PCB sat lower a bit and was starting to bend pins. I had to raise up the smaller PCB to half inserted so…