Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Pandora Box 6 controllers issue when in Jamma cabinet

5

MoppelTheWhale

Object Ram Bad

14

stj

NAC Splitfire: JAMMA streaming solution

295

psykom1

[HAS] JAMMA extension harness

0

Any PGM Conversion info out there?

1,262

Fluffy

Recent Activities

  • Rotanibor -

    Liked RGB’s post in the thread [HAS] JAMMA extension harness.

    Like (Post)
    Way overdue, but I'm happy to announce that the first run of my JAMMA extension harness is ready! - Supergun dedicated (not only for the HAS) - Hard gold plated JAMMA edge contacts - ~60cm cables length (~68cm total length) - 2x16AWG for GND, 2x16AWG for…
  • xtrasmiley -

    Liked RGB’s post in the thread [HAS] JAMMA extension harness.

    Like (Post)
    Way overdue, but I'm happy to announce that the first run of my JAMMA extension harness is ready! - Supergun dedicated (not only for the HAS) - Hard gold plated JAMMA edge contacts - ~60cm cables length (~68cm total length) - 2x16AWG for GND, 2x16AWG for…
  • MoppelTheWhale -

    Replied to the thread Pandora Box 6 controllers issue when in Jamma cabinet.

    Post
    you used a pb4 before? pb6 and 4 pinout should be the same - at least they were for me... ?(
  • stj -

    Replied to the thread Object Ram Bad.

    Post
    i'v seen the rom, but is the source online? it could be usefull if ported to cps1 hardware. :)