Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

NAOMI ERROR: JAMMA I/O BOARD NOT FOUND

38

Mrhide

Pinned AES Multi Cart Troubleshooting and help

577

Darksoft

Capcom PCB 85605-A/B/C-1 (F/M Hex Nut Brass Standoff Spacer)

4

VWI

Replacement MV-2F memory card port?

11

RandomRetro

KI2 DOM (Killer Instinct 2 Disc on Module)

50

hamster

Recent Activities

  • XtraSmiley -

    Liked brentradio’s post in the thread Finally, multi System 16B (Sega).

    Like (Post)
    You can send mine by Pony Express for all I care as long as I get it... Only 7 slots away! :D
  • Mrhide -

    Replied to the thread NAOMI ERROR: JAMMA I/O BOARD NOT FOUND.

    Post
    Quote from rtw: “To determine BIOS version without dumping. . Enter setup using the test button on the NAOMI . Use the service button and scroll through the entire menu 3 or more times . The top of the screen will change to the numerical BIOS…
  • Darksoft -

    Replied to the thread AES Multi Cart Troubleshooting and help.

    Post
    @raffy92 what happens to you is very weird. I would suggest that you send it to some other user from Japan that could help you to troubleshoot it. If that's not an option, you can send it to me for troubleshooting. I'm 99% sure that it will work here…
  • VWI -

    Replied to the thread Capcom PCB 85605-A/B/C-1 (F/M Hex Nut Brass Standoff Spacer).

    Post
    Quote from djsheep: “Disregard my comment. I misread it as “Captain Commando” which is CPS-1. Was confused as you mentioned A/B/C boards. ” No problem. It does have 3 boards an A, B, and C. Am guessing that this one is just a "Data East" version…
  • RandomRetro -

    Liked Kujako’s post in the thread Replacement MV-2F memory card port?.

    Like (Post)
    Well that was a major PITA... hard to get the solder to pull through from the "solder" side to the "component" side on the pins that have pads there. But, it passed the memory card test so I guess it's working? Will have to do some more in depth testing…
  • RandomRetro -

    Replied to the thread Replacement MV-2F memory card port?.

    Post
    Nice work. While it might have been a pita sounds like you are in business. Successful repair heals all :)
  • hamster -

    Replied to the thread KI2 DOM (Killer Instinct 2 Disc on Module).

    Post
    Most likely its a modified DOM that has the Drive Serial # / Model Modified to match the security checks in U98... still just easier to burn a U98 and then program a flash drive.. they are easy to get / find.