Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Capacitor trace pealing off PCB

2

rsignal

Retro Hardware Capacitor LISTS

32

sk8er000

Ringedge Keychip ID

43

ArcadeMachinist

Does this SDSI2SD Adapter Work for CPS3?

22

KOarcade

GC Loader, GameCube DVD drive replacement

46

nem

Recent Activities

  • RGB -

    Liked rsignal’s post in the thread Capacitor trace pealing off PCB.

    Like (Post)
    I've read this is typically fixed using epoxy. I'd search for these keywords: lifted pad epoxy
  • rsignal -

    Replied to the thread Capacitor trace pealing off PCB.

    Post
    I've read this is typically fixed using epoxy. I'd search for these keywords: lifted pad epoxy
  • jassin000 -

    Replied to the thread Capacitor trace pealing off PCB.

    Post
    Normally I wouldn't recommend hot glue, but in this case I think a light application under the lifted cap would provide some much needed stability. Of course if you ever need to remove it, that is going to be tricky... Maybe someone has a better…
  • RandomRetro -

    Posted the thread Capacitor trace pealing off PCB.

    Thread
    Connections are still solid so things work, but need to tack the trace down so the capacitor stays in place and doesn't cause more damage. Any recommendations on keeping the trace from pealing more of causing additional damage?