Dashboard

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Unread Threads

Topic Replies Last Reply

Battle Gear 3 Tuned HDD

3

Blackfish

Faulty TTX motherboard - any chance of fixing it?

9

penrhos

Pinned Games with Issues

246

Darksoft

Fantasy Zone II Conversion

19

Apocalypse

SUN PSU capacitor maps

9

invzim

Recent Activities

  • Blackfish -

    Replied to the thread Battle Gear 3 Tuned HDD.

    Post
    I managed to get one from Taito for Battle Gear 2. Emailed them directly and after some back and forth messages they sent me the wiring schematic. Obviously this is no help to you, but I would give Taito or Namco Japan an email and see if they'll help.…
  • jugu -

    Liked penrhos’s post in the thread Faulty TTX motherboard - any chance of fixing it?.

    Like (Post)
    Caps arrived Saturday - but was at an Ed Sherran gig so didn't have time to fit them until today... Soldering iron even on the highest setting was having none of it with clearing the holes so I resorted to the hot-air gun set at 400 on the back of the…
  • penrhos -

    Replied to the thread Faulty TTX motherboard - any chance of fixing it?.

    Post
    Caps arrived Saturday - but was at an Ed Sherran gig so didn't have time to fit them until today... Soldering iron even on the highest setting was having none of it with clearing the holes so I resorted to the hot-air gun set at 400 on the back of the…
  • Darksoft -

    Replied to the thread Games with Issues.

    Post
    I will check tomorow. Maybe a last minute bug.
  • BroadwayJose -

    Liked jassin000’s post in the thread Home Arcade System - new supergun sets.

    Like (Post)
    Install shots (and my one cord HD15+3.5mm solution)... Cpu7Lm1.jpg LLHkPBc.jpg 7JAqFdw.jpg For the OSSC to lock the the F3 via HD15 adapter, the HAS must be set to output Buffered TTL Sync. 2y9nK0T.jpg Open/remove the jumper at location #17 (TTL) and…
  • Apocalypse -

    Replied to the thread Fantasy Zone II Conversion.

    Post
    Quote from brizzo: “ I should be more clear then: if anyone posts conversion instructions here on AP for fz2dx/16c, it will be deleted. It is that simple. ” FZ2DX conversion I understand but extending work RAM on a 16B motherboard isn't something IP…