Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • oneleaf86 -

    Liked mR_CaESaR’s post in the thread Sega Universal Upright conversion.

    Like (Post)
    So I got delivery of the final pieces to the puzzle today! A raspberry pi 3 and the Multibios and zero key! (thanks @oneleaf86!!) 2767eed3af20175df9fc4122b2763e9e.jpg After changing the bios, the error 01 code immediately disappeared and got the…
  • Mrhide -

    Liked djsheep’s post in the thread PC for shmup emulation on 15khz.

    Like (Post)
    For Cave shmups, you should use this setup, but only with official Cave cardboard. arcade-projects.com/forums/ind…5ea97162125f5b0a0b0cd3e1d
  • nam9 -

    Liked mR_CaESaR’s post in the thread Sega Universal Upright conversion.

    Like (Post)
    So I got delivery of the final pieces to the puzzle today! A raspberry pi 3 and the Multibios and zero key! (thanks @oneleaf86!!) 2767eed3af20175df9fc4122b2763e9e.jpg After changing the bios, the error 01 code immediately disappeared and got the…
  • SVM -

    Replied to the thread Anyone using a CMVS-RGB pcb for MVS SCART/RGB?.

    Post
    Strange... Other people responded to me that the picture looks fine on their CRTs or flat TVs... Maybe a studio monitor handles the signals slightly different in comparison to consumer TVs? Here are 2 photos of the pcb in combination with a PVM:
  • mR_CaESaR -

    Replied to the thread Sega Universal Upright conversion.

    Post
    So I got delivery of the final pieces to the puzzle today! A raspberry pi 3 and the Multibios and zero key! (thanks @oneleaf86!!) 2767eed3af20175df9fc4122b2763e9e.jpg After changing the bios, the error 01 code immediately disappeared and got the…
  • phoenix07 -

    Replied to the thread ATX bench PSU.

    Post
    I've ordered the ATX breakout board and I will connect supergun via ATX 24-pin instead of Molex 4-pin
  • xtrasmiley -

    Liked kuze’s post in the thread IGS PGM English Patch Index.

    Like (Post)
    Quote from xtrasmiley: “Awesome, thanks for rounding this up and posting. For those games you say won't ever have the patches, would that still apply if someone came up with a multi-cart? ” Np! If a multi-cart is developed then it will likely…
  • LewisGamer -

    Liked Niko’s post in the thread Taito Type X2 Upgrades and Mods.

    Like (Post)
    Quote from LewisGamer: “Hmmm.... I've just got a 500GB SSd, I hope that's big enough... ” 256GB would probably be the max you would ever need for the latest revision of all the games. However, with that said, I have dumped multiple revisions of alot…
  • Yeah, I'm also on team "if it works, leave it alone". You could have thousands of hours of operation left in any working component. That's a lot in home use. Sure if it's losing focus, then absolutely, replace it. However, if it's working fine, then let…
  • djsheep -

    Liked Fluffy’s post in the thread IGS PGM Cart PCB Scans (And Projects).

    Like (Post)
    Yes, here is the thread including a patch for Martial Masters: IGS PGM English Patch Index
  • Nimmers -

    Replied to the thread The Sega Multi-System 16B Donor Board Thread.

    Post
    Quote from Apocalypse: “Quote from Nimmers: “Grabbed this on YAJ for about $130 Aus I'm definitely going to get the v1, would it be any good if I wanted to do a v2 later down the track? ” You'll have to replace the FD1094 by a standard 68000 CPU…
  • invzim -

    Replied to the thread ATX bench PSU.

    Post
    Quote from Frank_fjs: “Using the 4 pin molex isn't any better. They're designed to carry 2.5 amps, no more. You need to utilise the 20/24 pin ATX connector. It has appropriate gauged wire and a connector that can handle the current. ” For this…
  • Fluffy -

    Replied to the thread IGS PGM Cart PCB Scans (And Projects).

    Post
    Yes, here is the thread including a patch for Martial Masters: IGS PGM English Patch Index
  • djsheep -

    Replied to the thread IGS PGM Cart PCB Scans (And Projects).

    Post
    There’s English ROMS available for some PGM games on this site... Still just waiting for a PGM multi so I can make some room and offload the handful of carts I own and have one sit in the motherboard and call it a day...
  • PascalP -

    Liked atrfate’s post in the thread Fast IO to Jammafier to JVSPAC2 in a Vewlix?.

    Like (Post)
    Quote from PascalP: “Don’t think this will work at all, you are trying to use both the Jammafier and Fast IO in the opposite direction of how they should be used. So to get this straight, you have a Vewlix with Fast IO and want to connect to a PC? I…
  • Frank_fjs -

    Replied to the thread ATX bench PSU.

    Post
    Using the 4 pin molex isn't any better. They're designed to carry 2.5 amps, no more. You need to utilise the 20/24 pin ATX connector. It has appropriate gauged wire and a connector that can handle the current.
  • RJ45 to DB15 Controller Converter for MC Cthulhu/PS360+/Brook Retro Board A47auQSh.jpg Hello, I wanted to post this project here since it seem right up this forum's alley. I have been working on a cable for connecting my MC Cthulhu equipped arcade…