Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • AMS -

    Posted the thread Taito type x zero nesica games.

    Thread
    I have A brand new type x zero nesica mobo what games can I play with these and where to get the games. you need a HDD with sec pic that I know but can I run offline? thx
  • jimmyjames -

    Replied to the thread Blast and Astro city projects.

    Post
    so I started messing with the astro today and noticed this NhhpEht.jpg needles to say I’m not sure what could have caused this but it bugged me. I have a ms8-29fak I’ve been messing with. I grabbed it off of eBay as I didn’t get one with the cab.…
  • rocket -

    Replied to the thread Initial d6 linking.

    Post
    gateway 192.168.37.1 likely will work. the gateway should be same address as the ip of the router. I assume the ip of your router is 192.168.37.1 the problem you have there is, the gateway ip cant be the same as the ip of cab 1
  • Foreezy -

    Liked ekorz’s post in the thread Primal Rage Supergun Project.

    Like (Post)
    @SmokeMonster the wiring schematic makes it look like the pcb has amplified stereo, not line level. Is that what you’ve found? I never owned the filter board or cab and can’t make sense of the actual “jamma” pinout for the audio (manual). But here’s…
  • Foreezy -

    Liked SmokeMonster’s post in the thread Primal Rage Supergun Project.

    Like (Post)
    That is the pinout for the connector on the sub-board, but if you grab it where I did in this thread, it's before the speaker amplification and is line-level (IIRC, I sold my PR last year)