Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Arthrimus -

    Replied to the thread Minigun Supergun - An Open Source Supergun.

    Post
    Quote from jassin000: “Thats why when I mod a console I put the components inside it, the video coming out of the console must always be 100% safe/usable to the host regardless of cable used.The only console of mine that isn't true of is the PCEngine…
  • Geddon -

    Replied to the thread A Freeware Taito TypeX2 Multigame..

    Post
    Hmm, so what does it do for 4:3? You just get a bit less horizontal space? I have an Xbox 360 in a mk cab with a multi sync monitor to play mk9 and I think I run it 800x600 or 1024x768, not sure, but it is playable but it is a little strange compared…
  • xodaraP -

    Replied to the thread Taito F3 bad Color RAM.

    Post
    Palette RAM is Fujitsu MB8421 next to the priority mixer custom. Unlikely that this RAM has actually failed, look for bad/broken traces.
  • voltron -

    Replied to the thread A Freeware Taito TypeX2 Multigame..

    Post
    The Taito Type x2 games look good on a tri sync monitor. also I have a Capcom Q25 15k and i play the X2 system on it using a Universal Video Converter. it looks good in my opinion. also in case anyone is interested im using a Capcom i/o board. "Dip
  • SmokeMonster -

    Replied to the thread CPS2 Roll-Up Packs: All roms for the CPS2 kit.

    Post
    CPS-2 actually requires PHAT sorting
  • Geddon -

    Replied to the thread A Freeware Taito TypeX2 Multigame..

    Post
    Cool. I never got around to testing all the games on the old version so I plan to do that with this new version. I found a 500 gb ssd I was not using currently doing the hdd copy. So hopefully I will be messing around with this in a bit. Mine is the…
  • cps2 + mk would be sweet. I'm not sure how to do button layout for that though. Maybe put the run button where it should go for MK and use the two middle buttons for block? I actually have a MK cab that was MK4. I hated the side art so put MK2 on one…
  • erzane -

    Replied to the thread Discharging the tube.

    Post
    Quote from suverman: “Make sure the tiny 10 inch tool you use has proper connection to the 18awg wire as well and not insulated. ” Yep it has. Btw I've mistaken because my tiny tool was 4'' only (10cm). But the job is done.
  • keiichi331 -

    Replied to the thread NAC Splitfire: JAMMA streaming solution.

    Post
    Would really like to stream my Shmup sessions on twitch =)
  • kuze -

    Replied to the thread Software Tool Idea for simplifying JVS input.

    Post
    IIRC there is @corey's CJVS tool which will let you bind jvs to keyboard for MAME use, etc Then you could possibly use joy2key in tandem. Check out the MAME on TTX2 threads here for more info.
  • Niko -

    Replied to the thread TTx2 + Sega JVS I/O.

    Post
    Quote from jkl: “Sure, here it is. To get it working with my naomi setup I just have to disconnect the jvs cable from ttx and put it into naomi. Same I/O, same cable, same AC/DC adapter. Thanks Niko! ” I'm going to say this is probably just not…
  • mthngn -

    Replied to the thread CPS2 I/O Interface.

    Post
    Thanks @jassin000 for your help. Many problems: 1- i live in France. And where you can help me, i Sleep 2- i Spend a lot of Time at my work office and after, i have 2 childreen so i am always busy. If we can Check point after point my pcb perhaps…