Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • djsheep -

    Liked Fluffy’s post in the thread IGS PGM Cart PCB Scans (And Projects).

    Like (Post)
    Yes, here is the thread including a patch for Martial Masters: IGS PGM English Patch Index
  • Nimmers -

    Replied to the thread The Sega Multi-System 16B Donor Board Thread.

    Post
    Quote from Apocalypse: “Quote from Nimmers: “Grabbed this on YAJ for about $130 Aus I'm definitely going to get the v1, would it be any good if I wanted to do a v2 later down the track? ” You'll have to replace the FD1094 by a standard 68000 CPU…
  • invzim -

    Replied to the thread ATX bench PSU.

    Post
    Quote from Frank_fjs: “Using the 4 pin molex isn't any better. They're designed to carry 2.5 amps, no more. You need to utilise the 20/24 pin ATX connector. It has appropriate gauged wire and a connector that can handle the current. ” For this…
  • Fluffy -

    Replied to the thread IGS PGM Cart PCB Scans (And Projects).

    Post
    Yes, here is the thread including a patch for Martial Masters: IGS PGM English Patch Index
  • djsheep -

    Replied to the thread IGS PGM Cart PCB Scans (And Projects).

    Post
    There’s English ROMS available for some PGM games on this site... Still just waiting for a PGM multi so I can make some room and offload the handful of carts I own and have one sit in the motherboard and call it a day...
  • PascalP -

    Liked atrfate’s post in the thread Fast IO to Jammafier to JVSPAC2 in a Vewlix?.

    Like (Post)
    Quote from PascalP: “Don’t think this will work at all, you are trying to use both the Jammafier and Fast IO in the opposite direction of how they should be used. So to get this straight, you have a Vewlix with Fast IO and want to connect to a PC? I…
  • Frank_fjs -

    Replied to the thread ATX bench PSU.

    Post
    Using the 4 pin molex isn't any better. They're designed to carry 2.5 amps, no more. You need to utilise the 20/24 pin ATX connector. It has appropriate gauged wire and a connector that can handle the current.
  • RJ45 to DB15 Controller Converter for MC Cthulhu/PS360+/Brook Retro Board A47auQSh.jpg Hello, I wanted to post this project here since it seem right up this forum's alley. I have been working on a cable for connecting my MC Cthulhu equipped arcade…
  • Frank_fjs -

    Replied to the thread ATX bench PSU.

    Post
    That's your problem. They're hard drive power ports, they don't put out full amperage.
  • atrfate -

    Replied to the thread Fast IO to Jammafier to JVSPAC2 in a Vewlix?.

    Post
    Quote from PascalP: “Don’t think this will work at all, you are trying to use both the Jammafier and Fast IO in the opposite direction of how they should be used. So to get this straight, you have a Vewlix with Fast IO and want to connect to a PC? I…
  • Appley81 -

    Liked low_budget’s post in the thread PARSEC Supergun Project.

    Like (Post)
    Just a quick update Assembly is going well, unfortunately I have some back ordered parts and that is holding up production. Hopefully 1 more week and I'll be able to finish assembly and test 6 more Parsecs. I have to admit, I'm not very fast…
  • vaughan14 -

    Liked GC8TECH’s post in the thread IGS PGM Cart PCB Scans (And Projects).

    Like (Post)
    UPDATE 18. ADDED: "Marshal Masters" PCBS ADDED: "Puzzle Star" PCBs ADDED: "Dragon World EX" PCBs ADDED: "Photo Y2K 2 R-RATED Version" PCBs Yes this IS a genuine PCB..... ADDED: "Dragon World: Pretty Chance" PCBs. IS there anyone HERE in Mame Dev??? So…
  • Appley81 -

    Replied to the thread Anyone using a CMVS-RGB pcb for MVS SCART/RGB?.

    Post
    I have made this pcb and used it on a mv 1c .. works fine but the brigthness level was much darker than other standard game consoles connected to my BVM. I presume the resistor vaslues are wrong ?
  • GC8TECH -

    Replied to the thread IGS PGM Cart PCB Scans (And Projects).

    Post
    Quote from djsheep: “:) It’s a great game! Happy to have a genuine English version in the collection. ” I have had it at work since we opened.... But due to cost... i thought this would be one of the last carts to have. I would love to start doing…
  • nam9 -

    Liked lydz’s post in the thread system 16b new XN1 card.

    Like (Post)
    Aurail Bay Route Cotton E-Swat Flash Point Golden Axe Tetris Wrestle War ````````` More games are tested
  • djsheep -

    Replied to the thread IGS PGM Cart PCB Scans (And Projects).

    Post
    :) It’s a great game! Happy to have a genuine English version in the collection.
  • GC8TECH -

    Replied to the thread IGS PGM Cart PCB Scans (And Projects).

    Post
    Quote from djsheep: “Marshal Masters? Marshal Mathers? Martial Mathers? Eminem: The Video Game? ” Ironicly i have seen it spelt many ways toooo. The "ROM" Name is "XING YI". Its a very expensive cart aswell.... T.
  • djsheep -

    Replied to the thread IGS PGM Cart PCB Scans (And Projects).

    Post
    Marshal Masters? Marshal Mathers? Martial Mathers? Eminem: The Video Game?