Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • twistedsymphony -

    Replied to the thread System Reset Wire for System 246/256.

    Post
    The reset point on my 256 works great, I've been using it often. I pulled the mobo caddy out of my 246b to see if it had a similarly labeled RST point and I couldn't find one, though I didn't really go too far in the disassembly. it basically has a PS2…
  • rtw -

    Replied to the thread ATAPI/IDE ODE Testing.

    Post
    I was talking to krHACKen regarding these issues:Wangan Midnight (boots but freezes during attract mode, could be bin/cue issue)Wangan Midnight R (boots but freezes during attract mode, could be bin/cue issue)He states that the issue might be too little…
  • arcadeWC -

    Liked SuperScore29’s post in the thread JVS Emulator.

    Like (Post)
    Just want to say awesome job on this project! I've been watching for a while and I'm glad to see so much progress has been made. When I've got the time, I'll definitely be testing this out with my Naomi 2 and other boards, especially with my Logitech…
  • SuperScore29 -

    Liked bobbydilley’s post in the thread JVS Emulator.

    Like (Post)
    @obcd Good suggestions. I'm torn between the ideas. In terms of screens I've found OLEDs that cost around £1, so cost wise it would only add maybe £2 to each board to include a little screen and some buttons. The issue with this is that some of the…
  • bobbydilley -

    Liked SuperScore29’s post in the thread JVS Emulator.

    Like (Post)
    Just want to say awesome job on this project! I've been watching for a while and I'm glad to see so much progress has been made. When I've got the time, I'll definitely be testing this out with my Naomi 2 and other boards, especially with my Logitech…
  • AlxUnderBase -

    Liked jassin000’s post in the thread Jamma Extension sets with HAS kick harness support.

    Like (Post)
    JAMMA+Kicks! VJAhJ2v.png
  • AlxUnderBase -

    Liked Frank_fjs’s post in the thread Jamma Extension sets with HAS kick harness support.

    Like (Post)
    I had the same thought! That would make a spiffy looking silkscreen logo.
  • SuperScore29 -

    Replied to the thread JVS Emulator.

    Post
    Just want to say awesome job on this project! I've been watching for a while and I'm glad to see so much progress has been made. When I've got the time, I'll definitely be testing this out with my Naomi 2 and other boards, especially with my Logitech…
  • AlxUnderBase -

    Liked Frank_fjs’s post in the thread Jamma Extension sets with HAS kick harness support.

    Like (Post)
    I wasn't planning to, some things I like to keep just for me. :)
  • kioku25 -

    Liked SNK-NEO-GEO’s post in the thread JVS Emulator.

    Like (Post)
    Think of Apple products and make it as user friendly as possible for the average person (me).. I am very sure that people would pay whatever amount for that.. I am not sure why this tread is not on fire,what you are doing is incredible, very exciting…
  • tiff_lee -

    Liked Frank_fjs’s post in the thread Jamma Extension sets with HAS kick harness support.

    Like (Post)
    I had the same thought! That would make a spiffy looking silkscreen logo.
  • Frank_fjs -

    Replied to the thread Jamma Extension sets with HAS kick harness support.

    Post
    I had the same thought! That would make a spiffy looking silkscreen logo.