Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • awbacon1 -

    Replied to the thread This is NOT how you ship a Hikaru.

    Post
    www.youtube.com/watch?v=a_JLf40I0fg I literally made a semi-joking video about my Hikaru board getting destroyed in shipping last month!
  • awbacon1 -

    Replied to the thread This is NOT how you ship a Hikaru.

    Post
    lol wtf is this a trend?
  • jermz1 -

    Replied to the thread Custom Taito Vewlix Sub Panel Aux.

    Post
    Quote from Niko: “Quote from Dreygor: “I like this style .. however the button labels don't quite fit what I need :( I need something more like... P1 Coin .. P1 Service .. Exit .. P2 Coin .. P2 Service .. Test ” ^ This, or do a run with no labels at…
  • I want to mod some of my M2 hardware to use a non-volatile FRAM chip for the timekeeper, mostly to just have it done but also to document the procedure for other collectors of M2 hardware. Considering a lot of the battery backed RTC chips are NOS and…
  • awbacon1 -

    Replied to the thread Atomiswave Accidental power on reversed JAMMA connector.

    Post
    Quote from stj: “but then i would have to smack you for creating a closed market, jamma intentionally uses standard parts - if you want custom shit then use sega boards! :D and you only need one keyway, you can plug it in backwards. a history…
  • stj -

    Replied to the thread Atomiswave Accidental power on reversed JAMMA connector.

    Post
    but then i would have to smack you for creating a closed market, jamma intentionally uses standard parts - if you want custom shit then use sega boards! :D and you only need one keyway, you cant plug it in backwards. a history lesson, long before jamma…
  • lupinko -

    Liked jassin000’s post in the thread Home Arcade System.

    Like (Post)
    Quote from Jumpingmanjim: “It looks like the HAS would get in the way but I thought it was worth checking anyway. ” It gets in the way, you need a Jamma extension. Best extender money can buy is @Frank_fjs 's because its the ONLY extension to include…
  • awbacon1 -

    Replied to the thread Atomiswave Accidental power on reversed JAMMA connector.

    Post
    Quote from stj: “ZD = zener diode. i should work without it, put a big blob of solder on it and slide it off the pads. :D @awbacon1 - the jamma standard DOES include a cutout in the board and blocker in the edge connector. it's just that some people…
  • awbacon1 -

    Replied to the thread Retro Hardware Capacitor LISTS.

    Post
    This reminds me I still need to make a cap map for the Konami M2 boards
  • awbacon1 -

    Replied to the thread Turtles in Time - 4P no start button.

    Post
    Yeah I'd reflow the solder anyway. I've seen cracked joints that visibly were almost impossible to tell were cracked at all. Good to rule out the easiest items first. Have you used a multimeter to make sure you have continuity from the edge the…
  • stj -

    Replied to the thread Atomiswave Accidental power on reversed JAMMA connector.

    Post
    ZD = zener diode. i should work without it, put a big blob of solder on it and slide it off the pads. :D @awbacon1 - the jamma standard DOES include a cutout in the board and blocker in the edge connector. it's just that some people are too damned lazy…