Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • mathieulh -

    Replied to the thread Naomi Maple Adapters Available from Mitsurugi-w.

    Post
    Quote from Mitsurugi-w: “What did you use to remove it? ” I simply added fresh leaded solder to the joints, added flux and used a solder wick.
  • ic3b4ll -

    Replied to the thread SEGA System E PCB Repair Service Needed.

    Post
    Your board is missing the amplifier. That's what would be attached to the heatsink (it gets hot). It shouldn't stop the board from running but you'll have no sound whatsoever. You just have to find out what amplifier it uses, remove the heatsink, attach…
  • AMS -

    Replied to the thread Getting Error 01 on Akatsuki Denkou Senki Cart.

    Post
    No they can be replaced but that does not guarantee the working of the card and also it’s a job for a serious skilled smd person as Sega has fine traces that vanish before your eyes :)
  • DJLC -

    Replied to the thread Getting Error 01 on Akatsuki Denkou Senki Cart.

    Post
    Quote from AMS: “Again does not matter what you NetBoot This is one of the verry late release same with manic panic ghosts and all that japan stuff giveS error 01 with not the right bios. And if it still give you that with the right bios . You card is…
  • DJLC -

    Replied to the thread Getting Error 01 on Akatsuki Denkou Senki Cart.

    Post
    At least the dude said he'd refund...
  • Mitsurugi-w -

    Replied to the thread Naomi Maple Adapters Available from Mitsurugi-w.

    Post
    What did you use to remove it?