Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • nem -

    Replied to the thread Namco arcade audio amp wiring help!.

    Post
    Quote from Franco23444: “Thank you so much, have any idea what type of 12 pin connector this uses? ” It's Mini-Universal Mate-n-Lok te.com/global-en/products/conn…tors-and-accessories.html
  • xb74 -

    Liked Frank_fjs’s post in the thread Open Source USB to DB15 for Supergun adapter.

    Like (Post)
    Once my PCB is finished I shall be sharing everything. I can't release info now as it's not finalised nor tested. I'm currently using an Arduino Uno, USB host shield and a hacked in DB15 connector. I have a PCB shield I've designed that docks to the Uno…
  • DeWitt -

    Liked Frank_fjs’s post in the thread Jamma Fingerboards.

    Like (Post)
    I like the idea of the drill holes. I'll see if I can add them without jeopardizing the trace work. Any suggestions for diameter? How large should the holes be to accommodate pushing wire through? Re the solder jumpers, I can move them closer together…
  • DeWitt -

    Replied to the thread Jamma Fingerboards.

    Post
    What about a pin header? This would make rerouting even more convenient?!
  • Frank_fjs -

    Replied to the thread Jamma Fingerboards.

    Post
    I like the idea of the drill holes. I'll see if I can add them without jeopardizing the trace work. Any suggestions for diameter? How large should the holes be to accommodate pushing wire through? Re the solder jumpers, I can move them closer together…
  • paultje162 -

    Replied to the thread Taito Type X2 Upgrades and Mods.

    Post
    Quote from kazuo: “Anyone ever run into an issue where only one of the PSU fans spins up? I had this issue prior to swapping out the stock fans for quieter ones, and the problem persists after swapping the fans. I've confirmed all four fans (both…
  • acblunden2 -

    Replied to the thread Jamma Fingerboards.

    Post
    arcade-projects.com/forums/ind…f48d44978e016800579de0135 Hi @Frank_fjs, I am thinking 2 rows of drill holes between the traces should be added in the area highlighted above. The purpose is to allow for easier re-routing of wires. Instead of routing…
  • TheDeath -

    Replied to the thread Last Bronx conversion to Sonic the Fighters.

    Post
    Quote from ekorz: “I probably convinced him the 40pins are all 27c4002. That’s just what’s worked for my Last Bronx so listen to @TheDeath on those two chips since he’s built one! You can check with a multimeter for which pin is power if you want to be…
  • TheDeath -

    Liked ekorz’s post in the thread Last Bronx conversion to Sonic the Fighters.

    Like (Post)
    I probably convinced him the 40pins are all 27c4002. That’s just what’s worked for my Last Bronx so listen to @TheDeath on those two chips since he’s built one! You can check with a multimeter for which pin is power if you want to be sure, but I’d go…
  • KalessinDB -

    Liked Escarioth’s post in the thread Escarioth's Aluminum Cases.

    Like (Post)
    ok im not a pro among pros.....but i can still make stuff like that. if you have better ideas, i accept any help lol for single games (not multi) i can come up with something around the original arts from the game
  • djsheep -

    Liked GeekMan1222’s post in the thread Astro City II replacement light cover?.

    Like (Post)
    Find a professional business signage / art fabricator. Preferably one that has been in the business a long time and works with lexans or acrylics. There is one local to me he does all kinds of work for people and reproductions for their classic cars and…
  • evilsim -

    Replied to the thread CPS2 Multi - red screen.

    Post
    what a random human error thing to have happened. some good eyes on some of the members here :)