Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • erzane -

    Replied to the thread Discharging the tube.

    Post
    I see, so you have a very big screwdriver. Is it only the head or the whole size of the screwdriver which is important? Also, how to discharge the flyback? Before your precisions, I was planning to do this, but seems my scredriver is too small... Here…
  • I've seen this come up a few times, and its personally bugged me for quite a while. So I made a thing. (please ignore the awful layout, ill be replacing it soon) xby8e2f.gif This works by tapping into the LCD on the CPS2 Multi-kit, reading whats sent to…
  • Darksoft -

    Replied to the thread Conversion of single layer Taito Cup Finals PCB to something else?.

    Post
    Fantastic! Thanks.
  • Added a pic of the A17 mod i did on the back to the notes above
  • Darksoft -

    Replied to the thread Taito F3. Get your cart here.

    Post
    Can't wait to see those pictures.
  • Darksoft -

    Liked Kavas’s post in the thread Taito F3. Get your cart here.

    Like (Post)
    I installed last night and it does work. I haven't tested all the games but a handful loaded fine. The breaking of the region lock tabs was a little stressful but nothing I couldn't handle. Will post pictures in all it's glory soon. :thumbup:
  • Darksoft -

    Replied to the thread Darksoft Taito F3 Support needed.

    Post
    Quote from Chocozoka: “By the way, on each restart, does it normal that gekiridan is the running game which is display on the LCD Screen ? ” No, it's not normal and that means that no game is being written to the cart. That microSD that you have is…
  • twistedsymphony -

    Liked Frank_fjs’s post in the thread SEGA SYSTEM-16 MULTI - OLED BASED GAME SELECTOR.

    Like (Post)
    INSTALL INSTRUCTIONS: - SET all dips of the S16 multi dipswitch to OFF. - Connect the 3 pin JST XH connector of the included wiring harness to the main PCB of the S16 OLED games selector. - Connect the 4 pin DuPont housing to CN5. - Dock the S16 OLED…
  • Darksoft -

    Liked t-m’s post in the thread Darksoft Neo Multi Help thread.

    Like (Post)
    Quote from Darksoft: “Try this CPLD and see if it helps. If it doesnt, then it's probably a bad contact between cart and motherboard. ” That fixed it :thumbup: . Music working and no more Z80 error. Many thanks
  • twistedsymphony -

    Replied to the thread Button layout help.

    Post
    very cool project and pretty clever tapping the the data from the LCD. relays for the buttons seem a bit overkill though; you could accomplish the same thing with some Tri-State buffers, it'd be a lot cheaper and a lot more compact. 6x 74F244 could…
  • ekorz -

    Replied to the thread SEGA SYSTEM-16 MULTI - OLED BASED GAME SELECTOR.

    Post
    I don’t need the wired remote board, I have easy access at all times and/or could use a wireless remote.
  • I've seen this come up a few times, and its personally bugged me for quite a while. So I made a thing. (please ignore the awful layout, ill be replacing it soon) xby8e2f.gif This works by tapping into the LCD on the CPS2 Multi-kit, reading whats sent to…
  • nnap -

    Liked mypinballs’s post in the thread Hello from Uk.

    Like (Post)
    Thought i would add a quick message about myself seeing as i have added a few threads recently on converting and fixing up of arcade boards. (Taito ones recently) My name is Jim and i live in the UK, near Leeds. (North England) I run a small micro…
  • nnap -

    Liked mypinballs’s post in the thread Conversion of single layer Taito Cup Finals PCB to something else?.

    Like (Post)
    Added a pic of the A17 mod i did on the back to the notes above
  • nam9 -

    Liked mypinballs’s post in the thread Hello from Uk.

    Like (Post)
    Thought i would add a quick message about myself seeing as i have added a few threads recently on converting and fixing up of arcade boards. (Taito ones recently) My name is Jim and i live in the UK, near Leeds. (North England) I run a small micro…
  • Chocozoka -

    Replied to the thread Darksoft Taito F3 Support needed.

    Post
    I've tested these 2 packs : F3 Pure MAME Roll-Up 2019-07-18.7z and F3 Roll-Up 2019-07-18.7z Folder games on the SD root and several folders for each games into as your explanation. Ok for the file called NAME into each folder. And in each NAME File…