Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Will do. It's installed which makes it more difficult. I do have a second PCB (when I ordered parts it was cheaper to order several sets) so I might try that too and see if I get a different result.

  • That's correct I'm using a straight through cable which is what the AES uses. What cable is the PCB expecting? I picked up the sync signal before R13 and this works on my PVM but not on a standard TV, it is too weak. Colours are also very dim so all signals from this PCB are too weak.

  • Bumping this thread again Like a couple of others I have found this board is REALLY dark. I'm also having issues with sync on a standard CRT TV but it does sync on my PVM. I do have some questions to make sure I've done this correctly: I've connected the wires after the resistors on the RGB lines (traces go from here to the pins on the JAMMA edge) I connected the sync pin to the JAMMA pin but I got nothing at all, but connected before the resistor I do get sync. For reference: Neo MVS MV-2 5v mo…

  • Quote from plasia: “toilet paper is running low. ” Sounds like @Jumpingmanjim is able to help with that problem at least

  • Alive and well here

  • Quote from acblunden2: “Quote from xodaraP: “A heads up for those attempting this. These boards are level over 9000 for soldering to. They have a massive ground plane under the CPU and sap heat like nothing else. You need good soldering equipment with excellent thermal recovery and lots of quality flux or you will end up with.... A mess.... ” A Hakko FX-888 worthy for the job? The packaged tip ok? Or should I use another one? ChipQuick to remove the existing chip recommended? ” You'll want a bev…

  • [ITALY SITUATION COVID-19]

    xodaraP - - Forum News

    Post

    arcade-projects.com/forums/ind…01faee9526d06e176e7a7385b

  • [ITALY SITUATION COVID-19]

    xodaraP - - Forum News

    Post

    I'm actually ok with this. If a lockdown is what's needed, do it, sooner the better. The sooner we can get this under control and get some things open and the economy moving again, the better. I know it's not going to be the same but at least it will be better than the current situation.

  • [ITALY SITUATION COVID-19]

    xodaraP - - Forum News

    Post

    Melbourne and Sydney (our 2 largest cities) have just announced this morning they're going into lockdown. Others won't be far behind. They were trying to get people to do the right thing but like every country I guess, they don't.

  • [ITALY SITUATION COVID-19]

    xodaraP - - Forum News

    Post

    Quote from Aurich: “But no, dumbasses want to go to the beach. ” This was when our government realised just how badly the whole thing was being managed. They told everyone that pubs (bars), casinos etc were closing and everyone rushed to the beach.

  • [ITALY SITUATION COVID-19]

    xodaraP - - Forum News

    Post

    I went out this morning for a coffee (takeaway) - I was standing 2m behind outside, another gentleman stood a similar distance behind me. 2 people were in the shop standing right next to each other and an inch away from the counter having a conversation. People are still not understanding or reacting appropriately to this situation

  • Basically Lost Caves uses the original assets from BB as well as some additional. The files you have above, one zip file is all the required files for an original board and the second zip file is additional files required for a bootleg board. Ignore the file names, burn and install everything. The reason the bootleg needs additional ROMs is because it's a bootleg some of the assets and code are modified, incorrect or missing. You need to restore these to make it function like an original (you ca…

  • In honour of the @jassin000 Highlander philosophy I present the 2 slot Highlander Edition MVS Console arcade-projects.com/forums/ind…01faee9526d06e176e7a7385b Here is a video of it running [url='https://www.youtube.com/… Highlander Edition[/url] How does this meet the criteria? It is the first and only MVS console running on USB-C! There can be only 1 connector Other features: - Mini DIN 8 audio/video output (stereo audio using connections that allow volume slider to remain functional) - 5v mod …

  • The Rhea needs games formatted specifically - it's not ideal but it works. I don't think people who already have it setup are abandoning it. I think what SmokeMonster is saying is that fewer people will be bothering to put up with Deunan's rubbish trying to buy one in the 3 second ordering windows. With Fenrir and Satiator coming soon, people will wait for those.

  • Looks like bad connections between A and B to me. Try reseating a few times

  • You get the option of buying them with the multi or sourcing your own

  • Satiator is looking good so far. Took a long time to get where it is but the work that has been done to completely reverse engineer the entire system is very impressive. GDEMU works well enough, I haven't run into too many issues so far, Ikaruga is the only game where the ISO I have doesn't boot. In saying that I don't have the entire library, just the games I wanted/would play. It's not perfect and a better solution (preferably that you could actually buy) would be good. USB GD-ROM fills the se…

  • It's listed in the MAME driver for 19xxj ROM_LOAD16_WORD_SWAP( "19xj-07.6d", 0x200000, 0x80000, CRC(61c0296c) SHA1(9e225beccffd14bb53a32f8c0f2aef7f331dae30)) If your Phoenix set has 3-7 populated, original set will too.

  • [ITALY SITUATION COVID-19]

    xodaraP - - Forum News

    Post

    A lot of people are not feeling well/getting sick not because they have this virus but from the stress. Fighting at the supermarket for basic supplies, not having reliable information on what's happening tomorrow and the relentless torrent of misinformation from social media and scaremongering from mainstream media. Stay safe out there people. It will get better and let's hope that governments of the world will put a real plan in place if this comes back.

  • Please help! Broken CPS-II pins

    xodaraP - - Capcom's CPS2

    Post

    Hahaha ok, no need to worry about postage then. I'm in Nerang