Search Results

Search results 1-20 of 181.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    thanks guys, i really went into tornado mode this morning. i smelled it would go wrong today with everything starting to close. I never thought it would reach us, aluminum / steel / stainless manufacturers. stay home, dont socialise and stay healthy. Right when i'm back, i'll inform you all don't worry and i was so happy to get that battletoads case at last...damn it.

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    Hooooooolycrap . i was informed that we MUST close everything for 3 weeks -_- damn that virus. don't worry guys, everything is still on line up for paint... I'm so pissed, i needed just a few more days and everything was done and ready for shipping grrr. I hope everyone can wait. *edit update* i MAY have a last chance at this, we close only tomorrow night, i asked our people here if they could squeeze a place for our cases and i might be able to make them all tonight so let's just hope i can at …

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    blue has been made, next week ill probably have some more 90351121_215054286276848_7106192256461176832_n.jpg

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    Update : Went ahead and took a turn around production status. All cases were about to end insert process. I'll go check them back tomorrow morning if its all perfect, i'm going to test with my fake pcb to check on holes. and all that will be left is paint. @LittleLarrySellers Small problem with yellow paint for the double dragon's background. so i'm going to send the one attached to my case. IT's the same and that way i wont have to make you wait too long Also for all buyers, thanks for patience…

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    Updates : *Cases are now in debur process, next is bending as for people asking for CPS1 cases, i made all labels yesterday. ( i also made a king of dragon one for myself !) *I should receive all screws and nuts tomorrow (or monday if not lucky). *Can't wait to see how that battletoads case will look like when all bolted up. *I decided to make basic repro of my PCBs out of alu. That way i can fully test each parts that is going to fit the pcb and see if one hole moved. using my own pcb to test t…

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    Things are going smoothly it would seem every orders of TMNT will have this small free gift inside 89505300_539725666659750_7016282562137948160_n.jpg

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    Everyone paid very fast ! a big thank you to you all now it's time to work some magic. I went back at work and will be finishing everything up tonight all order should be put on queue for the during weeks to come. I'll update everytime i get some update if you have questions or anything feel free to ask... i'm pretty lonely here in the office *_*

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    Ok ! we've reached march 1st. for everyone in line ill contact you for adress, shipping cost and total amount. I'll start to work on the schedule process tomorrow night

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    So just to be sure as a last call. pre-orders should be closed starting march 2nd on monday. ill still have a bit of time ahead of that but when the schedule is started, i won't be able to add more cases to the list. If everything goes well, it shouldn't take more then a month to make/deliver everything. If i ran a bit late on time i'll contact you guys , no worries. Small changes -TMNT- --------- -Small holes to be added on top case, just for help with air flow stuck inside. -Konami vynil to be…

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    for those ordering up, i'll tag a small thing i made for fun. It's free~ and might not be included on other pre-orders i try to make something new each time but i'll end up with a few extras just in case and give them up to other TMNT or konami cases in the future until im out. and natural aluminum (no paint) Its on experimental process and i wont have a second try at this so i hope everything will be good. It should be able to stand on its own this time with help from 2 small legs not like that…

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    just in case someone would be interested in a astérix case type. I still have an old prototype (the one without names on both sides) i could sell it for 95usd. (original price is currently 110usd)

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    Just a last minute information. I was told that we're making some change here with paint stuff. i have to be sure that everything is made before april. Pre-order date will only last until march 1st. (it was previously march 15 )

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    ok for the heat. after a 5 hours straight test case is slightly warm to the touch. it always a bit warmsince its packing a bit of heat in there, but like always aluminum dispatch heat nicely. Just to be sure maybe ill put holes hidden under the logo (won't be seen) like .100" dia. TMNT is a pricey pcb and i wanna be sure it breath correctly ill keep that no holes version for myself...i never plays more then 1-2 hours so its fine. Everyone ordering one will have that new updated version Logo plat…

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    Quote from xtrasmiley: “Man I love your cases, but storing them is going to be a pain! ” Well... For storing and display i love them

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    A few stuff ill have to adjust with that tmnt logo... But in the emd its pretty damn looking good

  • Escarioth's Aluminum Cases

    Escarioth - - Project Showcase

    Post

    Almost done. only waiting for vynil. time to test for any heat problem for the upcoming hours this week end. and then it shall be put into the production lineup so what you guys think (dont forget , it still miss the stickers !)

  • thanks i'm pretty sure i can find someone from around here in canada for help but if out bad luck i don't ill send ya a message

  • hmm... i had forgot that no games came on eproms supplied. guess ill have to look for something to help on that matter

  • Quote from Derick2k: “I got a few I can part with ” oooh really :3 contact me, i might need 2 lol

  • hmm.. pretty far on the list for my part but that will let me time to grab a qorking sega 16..if someone has one for sale , give a poke